Thank you all for your abundance of patience this month :) It's going to be a busy week coming up and a few new models, sneak peaks etc. will be posted, so stay tuned!
For you folks who thought you had my release formula down to a science...I am shaking things up a bit and changing the order of upcoming models, haha.
2023-07-19 17:10:20 +0000 UTC
View Post
As many of you know, my older files were not designed for easy painting if you own a Prusa or Bambu machine that allows for AMS and colored prints.
I have been slowly working on getting these completed and making sure they print correctly.
If you have previously purchased or received the files as p...
Thank you all for coming back this month to snag the second of the Viking Pair.
I have also added a short broadsword and hope to add more as time allows down the line.
She was fun to color, but I did many test prints in various multicolor PLA and had to come back to my old favorite 2023-06-26 23:59:16 +0000 UTC
View Post
She is on the printer now and looking fantastic. In case you gnome fans want to get a jump on the PLA colors, the green is duel color but turns out shiny Emerald!
- ERYONE Yellow/Green Silk: https://a.co/d/7IwSJmY
- AMOLEN Red/Gold Silk: 2023-06-23 18:54:14 +0000 UTC
View Post
Hi,
Just a small change.
* I upped the Resolution on the owl head. This fix is only noticeable if you print it really big (that's how I noticed it).
* I also updated the .3mfs with the new head, and separated the eyebrows as a different color (as seen in the picture).
I also want to share the filaments...
2023-06-20 16:14:16 +0000 UTC View Post
Second update has the most recent files 6/20/2023
And Final files are also in the June Files post.
UPDATE: I noticed on some slicers the left wing could cause a crash. I have fixed and updated the bug.
..........................................................
This character was a HOOT to make, and I hope...
2023-06-17 00:29:04 +0000 UTC View Post
Y'all it has been a week and I am pushing through to get out the Early Release this weekend (all my fingers and toes crossed.)
I usually post a sneak peek, but I have some new mechanisms for this one and I want to make sure everything is as close to perfect as I can get for printability. It's Owl or nothing...am I righ...
Just wanted to share a working screen shot of the June exclusive Flexi Wolf.
Wrapping it up now, and dropping this Friday June 2nd.
Hope you like it
-Dan
Really wanted to get this Bonus out before the US holiday weekend.
*** Princess Viking Gnome is coming next month.
I am providing the colored file as well as the stl. But I just started the print and will upload photos when it's completed.
The weapons accessory pack works with this model. ...
2023-05-26 19:58:41 +0000 UTC View Post
As many of you know, the Exclusive Skeleton Knight from April was also voted to be released as a Charity Print for our non-profit, Flexis For A Cause!
We have been working on getting approval from the receiving group, Limbitless Solutions, as well as getting My Mini Factory on board to accept the donations AND a...
I have been working on printability and made a few small tweaks, after wrapping up many test prints and troubleshooting with a couple folks. There was a bit of a steep overhang on the neck that appeared on some prints. These files should do the trick!
To keep it simple for your file storage, I labeled everything update ...
2023-05-23 17:47:31 +0000 UTC View Post
Ok folks...#teamteeth or #teamnoteeth??? You now have options for 4 different models.
I got several requests for these. I went ahead and added the ALICORN, plus all models without the delightful toothy grin. Had to keep it smiling though, because I have never met a mean horse :)
Personally I still prefer the...
2023-05-21 18:45:52 +0000 UTC View Post
I have had hundreds of requests for these models, and finally able to provide all three for you awesome folks! Flexi and standing, no supports of course. And for the Pegasus, I decided to go with a very snug fit, but not attached for more customizable options.
Working on making mini's (50%), so I may have some u...
To the 3 Mamas in my life and all the Mothers in the group...
Hoping you are being celebrated today.!!!
-Dan
I may have made this teaser a little too easy... But I promise the end result still has a few surprises. Better get those frogs printed, because this one is going to be magical scaled up, has some fun color/design variations, and I think your machines are going to be very busy.
Coming next week!!! -Dan
It is that time of the month again.
For those of you just joining Patreon... this is a limited release that will be available during the month of June 2023 only!
Big Thank you to all who voted on this special character! Had lots of questions about making accessories and removable pieces...but for printability and to avoid little tiny parts that would be fragile, I opted for a true Print-in-Place model.
I beefed up the joints, changed the angle and shape of the...
Hello! PLEASE READ before commenting below. I make a post on the first day of each month with all available downloads. And I ADD TO THIS POST as the month progresses.
Full Model List Found Here: 2023-05-01 09:01:01 +0000 UTC
View Post
Time for a new code this month...Can be used at checkout for any of my older models released before you joined:
VivaFiesta23FF
Only works for Flexi Factory models in the shopping cart.
Here is the link to MMF online store:
2023-05-01 04:55:01 +0000 UTC
View Post
If you're a frog lover...this one is going to be fun to add to your collection.
I gave this character some extra attitude, and some strategically placed gear that will help with printability (and clearly aid in a successful mission.)
This render shows some fun color options, but I am also testing printing with ...
Happy Frayay...as my nine year old likes to say! Wanted to get these out for you folks that might be doing shows this weekend. The solid colors print pretty quick.
I added a stand and a bunch of different accessories. They work for both the Public Release: Knight and the Exclusive: ...
UPDATE: First off...I do not recommend going 50%, 60% is better. Printed on the Bambu in 3 colors, .16 layer height, took almost 12 hours.
- Joints are good
- One of the pinwheels broke
- There is definitely a loss of detail.
And this was a hard print, with major color opposition. So there wa...
Two Flexi Teddy Bears and a "mostly" print-in place accessory pinwheel.
Hoping to get these out tomorrow. Still making final tweaks and test printing through the night.! -Dan
My kids are too grown for hunting eggs, but never too old for peeps.
I have my printers running, and now it's time to eat. Happy Sunday y'all! -Dan
We still have quite a bit of time for the vote, but I wanted to show y'all the inspiration for the model.
When I worked at IGT, we had a little lunch battle going as motivation to keep our drawing skills sharp. We had to submit a drawing each week or buy lunch for the group. This character has a lot of personality, so...
It is that time of the month again. This one is going to be tough ;)
For those of you just joining Patreon... this is a limited release that will be available during the month of May 2023 only!
I added a new file for folks that want to make it really big!
You can print the tray and tail separately and glue together (I suggest super glue for PLA).
Thanks for the suggestion :) Dan
2023-03-28 13:14:52 +0000 UTC View Post
Just thought it was too cute to pass up. Lots of options here for printing and different configurations to sell. I added the color file shown above. The tray has a tail and collar, or just the collar :)
Here are the filament links:
- CC3D Marble: https:/...
2023-03-21 17:06:27 +0000 UTC View Post
For those of you who want to print a massive shark!
The big one in the picture is 220% (printed on the Bambu) the little ones 50% and 60%
I don't suggest using the curved if you're printing small because the tolerances are a little tighter.
Here is the Filament Link (ZIRO Translucent Winter, TTYT3D silk gold...
2023-03-19 17:39:24 +0000 UTC View Post
Small update.
After printing a little shark, I noticed that the fins were a little stuck and I had to work them free.
This update fixes that. I also updated the multicolor files.
Thanks again
-Dan
