Final Update: Download New Files Here!!!
Added 2023-05-23 17:47:31 +0000 UTCI have been working on printability and made a few small tweaks, after wrapping up many test prints and troubleshooting with a couple folks. There was a bit of a steep overhang on the neck that appeared on some prints. These files should do the trick!
To keep it simple for your file storage, I labeled everything update and deleted files from previous posts.
So many files, I did keep them zipped...but added the wings to the Alicorn and Pegasus main stls files.
*** Note I did also include the color 3mf files for Bambu (3 to 4 colors) and Prusa (2 color) ***
Comments
The flexi knight would work
Joshua O'Haleck
2023-05-26 00:06:00 +0000 UTCI love my Ender 5 and Sonic Pad! I need to check my Cura settings, it printed fine with S3D. I did turn off supports in Cura but maybe it didn't save. Thanks for answering me back!
2023-05-25 17:27:28 +0000 UTCI also print on an ender with the sonic pad and Cura slicer :)
Dan
2023-05-25 14:36:11 +0000 UTCNow we just need a cowboy to accompany this steed
Jeff
2023-05-25 14:13:43 +0000 UTCI have the Ender 5 S1 with a Sonic Pad. I have been using the creality slicer so I am trying S3D now. It looks like it isn't adding supports. I will see how that goes and we can go from there. Thanks!
2023-05-24 22:40:36 +0000 UTCPlease email me photos and let's troubleshoot. flexifactory@gmail.com. Supports are never needed on my prints and I may have some tips on settings, depending on your printer.
Dan
2023-05-24 22:14:44 +0000 UTCI downloaded the updated files and still don't get a good print. When they print, the joints in the legs have supports in them that I don't add. When I remove the supports, the joints in the legs are not complete and they break.
2023-05-24 22:02:25 +0000 UTCTaky mi ta fotka přišla vtipná!
Dan
2023-05-24 21:50:12 +0000 UTCsuper. já už hledal ty křídla. jinak jsem moc rád a vážím si toho jak dáváte barevné na bambu to je užasný. ps: to foto mě hodně potěšilo a rozesmálo né jen mě.
2023-05-24 16:35:41 +0000 UTCTo be honest, I do not have any clue about that stuff. When I received requests for it, had to look it up and make sure I could do it :)
Dan
2023-05-24 14:31:08 +0000 UTCyay #teamteeth
Dan
2023-05-24 14:30:26 +0000 UTCupdates!
Jeremie DeWitt
2023-05-24 13:18:56 +0000 UTCmerci beaucoup pour ce super travail
2023-05-24 11:45:28 +0000 UTCthank you for the update!
Israel Amado
2023-05-24 05:21:45 +0000 UTCI get the obvious, with the name k was expecting and alligator with a horn 🤷🏻♂️
ThatsCooliNeedit
2023-05-24 01:03:50 +0000 UTCcross between a unicorn and a pegasus i believe
Joshua O'Haleck
2023-05-24 01:02:23 +0000 UTCNo worries - just means I need to double check my settings haha! My 8 year old daughter is #teamteeth by the way, she thinks the Pegasus is adorable
2023-05-24 00:38:31 +0000 UTCwhy is it called an alicorn?
ThatsCooliNeedit
2023-05-24 00:38:22 +0000 UTCI have seen so many great prints already. Glad to hear yours turned out. Really just very small improvements for printability.
Dan
2023-05-23 19:29:10 +0000 UTCTotally up to you. They all function and my test prints came out good. This last push was to really help folks that may be printing in a lesser quality, achieve a better finished product. I use .12 or .16 layer height, 3 walls, 15% infill. So pretty slow and clean prints are the result.
Dan
2023-05-23 19:18:26 +0000 UTCOh I am sorry to hear that! Yes, those wings need great adhesion. One little movement can really cause issues.
Dan
2023-05-23 19:16:18 +0000 UTC
