Hey everyone!
After a couple of rough weeks — or honestly, a rough month — I’m finally back among the living with a new post! I’ve recovered, and work on Quetzalcoatl is in full swing again 🔥
I’m hoping to release her this month and also do a test print.
The figure...
Hey everyone!
I’ve come down pretty sick, so there won’t be any figure updates this week — but I promise to make it up next week.
Also, some important news: I’ve decided to significantly lower the subscription price across all tiers.
When I launched my Patreon back ...
First WIP of Tachibana Satsuki!
There will be two versions — one in lingerie and one in her school uniform ✨
At the same time, I’m slowly continuing to slice Quetzalcoatl — I’ll share progress on her in about a week.
Also, I’m currenty working on setting up some kind of “regula...
2025-09-14 18:45:17 +0000 UTC View Post
Hello everyone! 💖
I’m so excited to share some huge news — very first model swap for my Patreon, and it’s with the absolutely amazing Pikky Prints!
As part of this exchange, my subscribers will receive Marin Kitagawa (Dishwasher Bunny) from My Dress-Up...
Finally, I’m happy to announce the release of Nitocris! 🎉
All subscribers will receive a link and a promo code for Cults3D in their DMs (trying out some new ways of distributing the models).
2025-08-31 10:03:37 +0000 UTC View Post
The NSFW version of Nitocris is still pending approval on Cults. As soon as it’s ap...
This weekend I finished slicing, placed all the keys, double-checked that nothing intersects, and so on.
Now all that’s left is to convert everything into STL, make pre-supported versions, and finally release her.
The figure is going to be big — it’s the first one I’ve made in 1/6 scale
2025-08-24 19:12:57 +0000 UTC
View Post
This weekend I finally wrapped up all the renders for Nitocris and also started slicing her for printing. There will be around ~20 parts at the end.
On top of that, I sat down to sketch a new character that I’d like to make quickly before jumping into the diorama from the poll. (The character is pretty simple, so GOD ...
2025-08-17 16:11:53 +0000 UTC View Post
I can finally say that I’ve finished working on 3D part of Nitocris — and I’m ready to show you the first renders)
All that’s left is to make some additional renders for details, put everything together, and finish slicing her for printing.
So the release is nevitably getting closer!
Also,...
I’m hoping this is either the final — or at most, the second-to-last — WIP for Nito!
This week, I finished the base and all the small details on the body and accessories. All that’s left are the hair and a few facial touch-ups — then it’s off to rendering and slicing.
I’m genuinely excited at the though...
So yeah… once again I slightly underestimated the scope of work))0)
She’s very close to being finished now — but it’s clear I won’t make it by the end of the month
The staff head tested my patience — it took quite a while to figure out how to make it look just right. Also, I have a few ideas for...
Time for the Sunday WIP! ✨
The NSFW version is already done — now it’s just a matter of polishing up the small details, hair, and base.
Overall, solid progress this week! I’ll try wrap up all the 3D work by the 27th, and then jump into slicing and rendering.
Hope you’re enjoying following the proc...
I’m 3 days late with this post — guilty and i know that
But honestly, I didn’t have much to show last week anyway, since I was completely focused on building my new PC
This week’s Sunday post will be right on schedule
I’ve placed the draft sculpt in its final pose and today...
2025-07-16 16:29:41 +0000 UTC View Post
I suddenly realized that since launching my Patreon, I haven’t posted my Quetzalcoatl model here even once…
I sincerely apologize for that and fixing it now😅
The sculpting part is fully complete and I don’t plan any changes. However, due to the complexity and number of tiny details, the cutt...
2025-07-06 18:56:58 +0000 UTC View Post
This week’s been pretty rough, so I didn’t have much time to work on Nito — but I did manage to tweak some details and finally lock in the draft pose. I had a few options, but this one felt the most dynamic and interesting.
Overall, I think I’ll be able to finish her by the end of July (or at least I’ll do my ...
2025-07-06 18:39:35 +0000 UTC View Post
Here are first glance on my Nitocris from Fate Grand Order I've nearly completed work on all main forms, next week ill deep dive in posing and detailing.
Btw im not entirely sure about pose just yet, but it will come as it goes.
I’ve been wanting to work on something like a diorama for a while now — so I’m bringing you two options to vote on! I’ll start working on the chosen one after finishing Nitocris and Quetzalcoatl (probably around August).
2025-06-22 15:15:24 +0000 UTC
View Post
With the release of Mamika Kirameki, I can finally announce that the launch is complete.
The welcome pack with six models is now available to all subscribers on ALL tiers.
Now I want to dive a bit into my plans for how I’ll build communication with the community moving forward 👥
–
Mamika Kirameki form Re:Creators is now available!
In ZIP you will find:
18 cut and keyed, non-supported STL files
additional pre-supported STL files
8 render pictures + video turntable
(Note, that my pre-supported files are not fully optimized so ...
2025-06-22 11:09:56 +0000 UTC View Post
After a couple of days off, I finally sat down to work on the last model for the welcome pack.
And wow, this one’s going to have a lot of little details 😅
Aiming to finish it over this weekend because I’m DYING to get back to working on Nitocris — but, well - priorities are priorities.
So! I’ll...
2025-06-10 19:07:18 +0000 UTC View Post
Kiga The Famine Devil from Chainsaw-Man is now available as a part of a welcome pack!
In ZIP you will find:
15 cut and keyed, non-supported STL files
additional pre-supported STL files
8 render pictures + video turntable
(Note, that my pre-supporte...
2025-06-04 18:04:00 +0000 UTC View Post
Small WIP on Kiga - almost finished with slicing.
Unfortunately, the increased workload at studio made adjustments to my original plans, and I wasn’t able to finish the Welcome Pack by the end of May as I had hoped(((
BUT, 4 out of the 6 models have already been released, so I still consider the pace quite so...
Alya from Roshidere is now available as a part of welcome pack!
In ZIP you will find:
18 cut and keyed, non-supported STL files
additional pre-supported STL files
9 render pictures + video turntable
(Note, that my pre-supported files are not fully ...
2025-05-25 11:20:55 +0000 UTC View Post
A small WIP on Alya
Since the beginning of May, I’ve been absolutely swamped with studio work, but I’ll do my best to finish Alya-san by the end of next week (most likely aiming for a release around the weekend of May 25 — but no promises)))0)
Right after her, I’m jumping straight into the next figure wit...
2025-05-15 04:54:30 +0000 UTC View PostA pretty significant milestone just passed — it’s been almost exactly one month since the Patreon launch, and with it, half of the launch plans are already complete (3 out of 6 welcome pack models are now available on all platforms).
There’s still a lot of work ahead to finish the remaining 3 models, after which I...
2025-05-05 06:03:08 +0000 UTC View Post
Megumin from KonoSuba is now available!)
In ZIP you will find:
19 cut and keyed, non-supported STL files
additional pre-supported STL files
9 render pictures + video turntable
(Note, that my pre-supported files are not fully optimized so double-che...
2025-05-05 04:41:50 +0000 UTC View Post
