Hi Guys,
In this livestream I will demonstrate how to assemble an SSR2. I'll start with the twist receiver and the other parts that I have released. Remember to join on discord if you'd like to participate in the chat, otherwise there's YouTube.
There will be a part 2 later this month once I have released t...
2025-11-02 20:37:57 +0000 UTC View Post
Guys, I've been quite unwell for the last week and I've not made the progress I'd hoped. So here's the plan: as promised I'm going to release today the STLs as they are, which includes the finished receiver and top frame.
I will follow up with the chassis and electronics enclosure soon, as well as a wiring diagra...
2025-11-02 00:53:43 +0000 UTC View Post
Hi Guys,
This is this month's livestream. As I mentioned a few days ago I have a new machine to show off. This is the Tune in and see me demonstrate the SSR2 prototype. This is my all-new two-axis brushless motor driven stroker.
Livestream is at 2300 BST (1800 EDT) on 20th October. YouTube link is above, but if yo...
2025-10-19 21:36:55 +0000 UTC View Post
Hi guys,
SSR2 Alpha is on the way.
This is a new multi-axis machine that combines up-and-down strokes with twist.
I've been resisting calls for a twist module for SSR1. These can be heavy and awkward, but the main reason is I really don't like the flying leads needed to hook up a twist motor electrically. Hi...
2025-10-14 20:08:41 +0000 UTC View Post
Hi Guys,
It's now October so as promised here's an exclusive update on SSR2 Alpha. This device will be a 2-axis quiet stroker. It will have a VESA mounting scheme just like OSR2 and SR6 but its movement axes will be stroke and twist. This will be a very unique machine, both in its configuration and its drive mechanism. ...
2025-10-01 20:17:32 +0000 UTC View Post
Hi Guys.
As I said in my public post, I'm going to do a livestream on heat management in SSR1. I've been doing some experiments and what I've found is very interesting. I'll demonstrate it live.
See you later on YouTube, or better still join us on Discord if you want to join the chat.
Tempest
Edit: We ...
2025-09-22 12:58:36 +0000 UTC View Post
Hi guys. This month I am doing some long needed research into the issue of motor heating. I am also aiming to get an early, early alpha for my 2-axis brushless device out soon.
Designing SSR1 has been a very interesting experience because whilst the device only has one axis it has exposed me to a whole range of engineer...
2025-09-11 20:20:08 +0000 UTC View Post
Hi guys,
This is, of all things, a ring-shaped shower nozzle with oscillating internal pulses. For fun reasons of course.
Sometimes I have wacky, out-there ideas. In this case what I wanted to was to get a little bit...
2025-09-02 14:58:14 +0000 UTC View Post
Hi guys,
This livestream is a demo of the brushless motor linear actuators I have been working on recently. Quite excited to show you guys what I've been working on.
Tempest.
2025-08-18 15:29:37 +0000 UTC View Post
Hi Guys, it’s time for an update on what I’ve been up to.
My long term goal is very quiet multi-axis stroker devices, driven by brushless motors, and I have been using the summer lull to make some significant progress toward this. In the meantime, incremental improvements to SSR1 is the name of the game for my short...
2025-08-18 14:56:21 +0000 UTC View Post
Time for another minor release as I get through the summer silly season and work on interesting stuff in the background
This is an alternate encoder mount for SSR1. I have noticed that it seems to be increasingly difficult to get hold of the form factor of MT6701 encoder that i specify in the build instructions, with a ...
2025-08-02 09:45:54 +0000 UTC View Post
This is a minor release as I'm working on some background stuff at the moment, leading up to more substantial releases in the future. This is an updated FeelStroker type receiver for SSR1 Beta that should be a bit stiffer than the previous iteration.
Enjoy!
Tempest
(The files are protected with the july ...
2025-07-01 15:52:01 +0000 UTC View Post
Hi Guys, it's time for an update.
I have a small hardware release coming, but mostly I'm working on backend stuff and future projects. Plus I've been on my summer holiday.
For my Maker ($8) release I am putting out a new receiver for SSR1 Beta. It's a drop-in replacement for the current one for the FeelStroker cas...
2025-06-25 19:01:39 +0000 UTC View Post
This is the hardware release for June: I call it the Ergo Body. I have designed this with handheld use in mind. It's an alternate case base, case cover and fan housing for SSR1 Beta. There are A and B variants of the case cover. All of the other SSR1 parts, assembly procedures, etc are exactly the same.
As with the stan...
2025-06-01 19:10:19 +0000 UTC View Post
Hi guys, it's time for an overdue update on what I'm up to.
Short term I have an alternate case design for the SSR1 on the way, longer term I have a rather unique multi-axis device getting close to a first prototype.
SSR1 Beta was designed to be simple and uncomplicated, a significant improvement on the Alpha desi...
2025-05-28 18:53:28 +0000 UTC View Post
This is the hardware release for May, in which I have given the SR6 some long overdue love and attention.
I have updated the base and frame to use M3x5.7mm and M4x8.1mm heat-set inserts in place of the M3 and M4 nuts in the original Beta design. I have also updated the lid and arm parts to use M3x12mm countersunk bolts,...
2025-05-01 22:59:00 +0000 UTC View Post
Hi Guys,
I want to make my community livestreams a regular thing again, 2-3 times a month. The last one went well, and I was very pleased how the streaming to YouTube made the video immediately available for those of you who couldn't make it.
I would like some feedback however. In the last week since the stream th...
2025-04-24 18:23:04 +0000 UTC View Post
Hi Guys,
I'm going to do another livestream this week. I'm going to start assembling a new SR6, including new parts updated to use heat-set inserts. I thought it would be good to demonstrate installing the inserts, because they're not as scary as they might seem at first.
The stream will be at 11pm BST ( 2200 GMT,...
2025-04-15 18:50:21 +0000 UTC View Post
Hi Guys,
Time for a public update: I am back, SSR1 Beta is a thing, and I'm now working on some longer term projects. In the meantime expect some incremental hardware upgrades.
As I continue to move away from servo-based devices toward brushless motors I want to leave my old devices in a good state. Back in June ...
2025-04-15 15:10:34 +0000 UTC View Post
Hi Guys,
I'm going to have another go at livestreaming to YouTube, as I think I've resolved the technical issues from last time! I've had a significant amount of interest in an introduction to basic CAD skills, so the plan is to do a quick demo of how to use Fusion360, then maybe take a look at some of my designs in CAD...
2025-04-09 14:32:40 +0000 UTC View PostFrom time to time I like to promote other creators. This one is long overdue!
Sorites Paradox, the creator of Ayva Software, which includes tools that are a well established staple of this community, has created an online store. In this store you will be able to buy completed builds of TCode devices and related accessor...
2025-04-08 23:07:24 +0000 UTC View Post
The purpose of this Patreon is to keep evolving and improving multi-axis stroker robots. I generally aim to get out a release each month and the result of that is finding stuff amongst my back catalogue of posts can be really difficult!
If you are new to my work this is the place to start. I have produced comprehensive ...
2025-04-01 20:48:41 +0000 UTC View Post
Hi Guys,
I'm going to try something new today. I'm going to do a community livestream on Discord as usual, but this time I'm also going to see if I can stream it directly to YouTube. I'll be going live at 23:00 GMT, which is in just under 3 hours time. Video link is above.
I'm going to be looking at the SSR1 Bet...
Hi Guys,
It's time for a free release. I'm making available a version of the OSR2 - based on the ESP32 - along with a dedicated set of build plans.
I'm doing this because I have been working with the guys over at Haptics Connect and I'd like to promote some of their work. They have come up w...
2025-03-05 00:34:33 +0000 UTC View Post
As promised here are the build instructions for the SSR1 Beta.
Unlike with SSR1 Alpha in this document I have gone to great effort to make sure that this document takes you through the whole assembly process of the SSR1 Beta step-by-step. I have included instructions for the mechanism, as well as both versions of the co...
2025-03-01 18:53:43 +0000 UTC View Post
Hi Guys,
This isn't the SSR1 beta instructions, sorry. This is a hardware release as I am aware that time is moving on and I want to put something out this month. This is a cooling fan mount for SSR1.
Every stroker robot generates heat as it operates and SSR1 is no exception. With light usage heat usually doesn't ...
2025-02-20 22:37:38 +0000 UTC View Post
Hi Guys,
The SSR1 build instructions are coming but it's going to be a little while longer.
I hate to keep using the same excuse but unfortunately I, and my family, have been unwell for the last month. As I've mentioned, I have a 1-year old son and from the moment he started moving and interacting with other kids ...
2025-02-10 22:38:07 +0000 UTC View Post
Hi Guys,
I'm calling this the January hardware release.
This is a case cover designed to accommodate the Millibyte integrated SSR1 PCB. There is a PCB cap that is attached to to the PCB using 2x M2x6mm bolts. This cap then locates into a slot on the case cover, making the USB-C connectors accessible.
I did ...
2025-01-17 21:20:30 +0000 UTC View PostHi Guys,
It's a new year, and I have some exciting news regarding the custom PCB for SSR1 Beta.
As I mentioned last month, I have been working with a member of our community to get all of the electronics associated with SSR1 onto a single integrated PCB. This PCB handles USB-C power collection, the ESP32 microcont...
2025-01-08 00:03:43 +0000 UTC View Post
Hi Guys,
As I've said Christmas is fast approaching and it's going to be a week or two into the new year before I think I will be able to get out the first release of the SSR1 Beta build instructions. In the meantime, however, I am putting out some extras that I originally wanted to put out with the first release.
