Dear patrons,
It is a very rainy day in Sweden today. I hope you have had a good summer. Here, work is gearing up to normal again. Kid and wife leaves me alone during the days when they are at school.
Release of Deep forest 2
I have just released Deep forest 2 to you. I have printed a lot of...
2023-08-31 14:56:52 +0000 UTC View PostDear Patrons,
I'm incredible grateful for your support here on Patreon. But the time for the transition to MMF is now. Here are the changes I'm making to speed up this process:
Dear tribers,
Summer seems to come to an end very early here in Sweden this year. Maybe it will come back for a short visit later, I hope so.
I'm gearing up from vacation mode to working full time again. The wife and kid is going back to school (wife is a teacher) and that will give me peace and quiet to work. :-D...
2023-08-09 14:19:50 +0000 UTC View Post
Dear patrons,
I have today released the african scifi and monorail to you via MMF.
The monorail is a bit more complex so it also comes with a manual.
If you can't find the release or have trouble with any of the models, don't hesitate to reach out.
In July I will have a bit of vacation. But I will also...
2023-06-29 10:43:56 +0000 UTC View PostI have two suggestions from you guys and one I made myself.
Everything to fill a starship with stuff: Bunks, lockers, gurneys, workstations, monitors etc etc etc. Could be used to fill a colony or a spaceship.
Rainforest or savhanna Africa this time, not northern Afric...
2023-05-08 17:22:56 +0000 UTC View Post
Dear patrons,
I just finished the outer shape for the final house, almost. Chimney still need to be attached. Alternatives for doors created. Solid version created. Dormers created. Test prints and paints.
The fantasy market is done. Just some more painting to do.
I will soon...
2023-05-04 12:48:32 +0000 UTC View Post
I will not make this longwinded:
Ok, a few more words:
I have been staying in my hermit cave where I retreated after my kickstarter flopped. But I am back now baby!
I have done a couple of pieces for a fantasy marke...
2023-04-25 12:23:38 +0000 UTC View Post
Dear Patrons,
You can find a new zip-file for the small building 2 in the last release folder. This is the last stretch goal for the kickstarter I did half a year ago. This will also be printed and painted.
Now, on to new adventures. I am in the process of taking down my old company and starting it in a...
2023-01-18 11:51:38 +0000 UTC View PostDear Patrons,
October is soon at an end. I have some stretch goals left for Domina Ferrum. So November will probably be started a bit late. And then comes Christmas. I will have some time off.
So this project will stretch over November and December.
There were a lot of suggestions this time. Very nice, thank...
2022-10-24 07:50:33 +0000 UTC View Post
Dear patrons,
The scifi dwarf outpost is rapidly expanding. But as we are over half the month the deadline is approaching. I will do one of the stretch goals for Domina Ferrum this month too, it will take a couple of days. Time flies. And that is a good thing.
At its current state, the outpost is usable. But you c...
2022-10-17 05:31:25 +0000 UTC View Post
I started the month with a bunch of experimenting. First with different broad concepts, then with different designs elements.
So, to your big surprise (not) this became a modular system. The design is based around moduls confined to 80x80x80mm (a bit over 3 inch). There are so far walls, corners and roofs. Parts include...
2022-10-12 09:08:47 +0000 UTC View Post
Dear Patrons,
The files is up in the share and I will send each of you a private message with the release (so I can make this post public).
This is what is delivered:
Dear Patrons,
We are at halftime for the Italian landscape. I have a hedge, a low stone wall (to surround your garden with), the beginning of a dirt road and a couple of houses. If you have access to the early releases, there are a bunch of STL-files for you to examine.
I will continue with the houses and also mak...
2022-09-16 13:27:08 +0000 UTC View PostDear patrons,
Yesterday was the last day in IT for me (for now). I'm now going full time with Terrain4Print.
I'm going full time on 3D modeling. Expect many more models.
Live on income from patreon. Release all terrain for free. I'm very very far from that right ...
2022-03-05 09:39:34 +0000 UTC View Post
Dear Patreons,
It was a long time since I made a video like this, it shows. But anyway, here it is.
2021-07-10 21:30:23 +0000 UTC View PostDear patrons,
I just want to let you know that I am working, currently on Ulvheim balconies. But it is a bit of back and forth, design wise. I thought I had all the railings done (the big part). But decided I needed to redo about half of it. I am nearing the end for Ulvheim and I don't want to mess up quality.
Tha...
2021-04-22 06:18:40 +0000 UTC View PostDear patrons,
I have been home sick for a couple of weeks now. I am stressed out and exhausted. To change this I have made the very hard decision to put Terrain4Print on hold for at least a couple of months.
Dear patrons,
I'm very tired of this virus mess so I will not talk you to sleep about it. Simply: take care of yourself.
Two new releases are up. Since thingiverse isn't working very well at the moment I give you cults3d and myminifactory.
I think all of these are shape ready. Now I just need to drill them up to make room for connecting clips.
We have:
I have actually been to Japan for a week. Airports are super boring. Good that I brought a laptop with blender installed. This is the current state of the brownstone building.
I will be going to 3D meetup, just signed up. I will not make anything special for it. Just bring what I already have and show ...
2020-02-15 15:39:16 +0000 UTC View Post
Dear Patrons,
I'm getting started on the brownhouse now. Screenshot above shows my plans. The blue parts are the six basic blocks. Two entrances, two middle floors, two roofs. Each long side will come decorated or flat with clip holes and magnet holes.
As the grey parts shows, you can also mirror for more variety....
2020-02-10 08:44:03 +0000 UTC View Post
Dear patrons,
The vote is now closed. I'm sorry about not being able to add Roman building to it properly. I'll add it to the next vote as well.
The results doesn't speak for themselves. In the beginning, modern buildings started out very strong, but the statues managed to catch up and win in the end. But it was v...
2020-01-19 18:46:18 +0000 UTC View Post
Be warned, there is a bit of technical terms in this text. If you are not into 3D graphics just look at the result.
I am a blender user since ten years. I started out with 3D studio R4 (in Dos) some 25 years ago. I have since then used 3D studio max, Rhino, Wings3D and a tiny bit of sketchup before climbing the hurdle a...
2020-01-08 14:23:30 +0000 UTC View Post
Dear patrons,
Thank you for 2019. Here is a quick recap of what happened:
* Ulvheim kickstarter
Yeah, that was it (almost). It has been an experience, not all good but not all bad.
I look forward to resume normal operations. Unfortunately, Ulvheim is not completely done yet. But on a positive sid...
2020-01-05 09:30:23 +0000 UTC View Post
Dear patrons,
Thank you for your patience and continued support. I know this Ulvheim thing has dragged on for far to long. :-/
Anyway, I have two new releases for everyone that was a patron before the kickstarter started. In the release folder you will find statues.zip and roads.zip.
I have every Friday off ...
2019-11-24 11:35:18 +0000 UTC View Post
The kickstarter is now closed.
Models will be available later, most probably at gumroad:
https://gumroad.com/terrain4print
2019-10-23 18:33:27 +0000 UTC View Post
Dear patrons,
My kickstarter for Ulvheim has only 13 days to go. Several stretch goals has been unlocked and there will be more, I am quite sure.
https://www.kickstarter.com/projects...
2019-10-09 16:56:18 +0000 UTC View Post
I made a container. A bit sci-fi, but could work for many settings, even modern. Then I smashed in up into three versions.
I made a car. Then I stretched and squeezed it to make it into three versions. Then I smashed them up. 13 versions all in all.
I'm printing this now.
I'm continuing with a tau container....
2019-09-08 19:58:13 +0000 UTC View Post
Dear patrons, thank you for yet another months support.
I have now done the final recipes before the kickstarter can start. Here they are:
https://www.dropbox.com/sh/ukzzly0jg091yke/AACf0xcwZf_KQ6J5KpVHXzB...
2019-09-02 18:45:38 +0000 UTC View Post
Devon Jonas, aka masterwork tools, has made some new variants for Ulvheim B. Thank you very much!
I have myself done a new recipe. It's not done yet, since I need to print the parts for it, assemble it and paint it so I can make cover images.
