Flexi Phoenix (Early Release) DONE!

Already purchased!! =)

Melissa

This is 40% off for members! Link in pinned post.

Dan

On my way to find this one!!!

Melissa

This is an older public model. so I offer 40% off through My mini Factory. Check the 40% off link and it will take you right to it :)

Dan

how can i buy this

Hickson.ejlk

The files I give out each month rotate, as you may have missed on the sign up page. The Phoenix is available with the 40% off code :)

Dan

Magpulx720

I cannot find the phoenix file anywhere?

David

DM sent. This file is an older Public Release and available with the 40% off code.

Dan

How do I download this?

Jeff Ireland

how do I get this

Gage Griffith

This is an older public release, just dropped off for February patrons. But you joined yesterday, so all the files including this one were emailed from my mini factory for access. Check your messages please.

Dan

is this available?

Adrian Arnold

The stands are in a separate post...but also all of the files are in the December Downloads post :)

Dan

where is the stand?

Elli

TTYT3d : L:ink here: https://www.amazon.com/dp/B07VJ2RHKF?tag=onamzdani02e3-20&linkCode=ssc&creativeASIN=B07VJ2RHKF&asc_item-id=amzn1.ideas.A1EM0DT4144J&ref_=aip_sf_list_spv_ons_mixed_d_asin

Dan

What is the brand filament you've used on this picture and the crocodile?

Alexandre Vercammen

I can't wait to print this. I am so excited.

Shawn Springer

Just finished printing it and it is fantastic!!!

Mike Blaze

i have been buying your prints on cults. so glad i now found your page. your so creative

paulene schmedeke

i put your settings for my ender 3 pro. my time is double yours. cant figure it out

Hanni White

Bellissimo modello

madalin tudor

15% infill, 3 walls, 100% Scale, 40mm/s, 0.6mm = 8h47m

Alexandre Vercammen

20% infill at 100% scale takes me 4 hr and 41 mins, printing on a flsun sr running klipper

drav3n76

depending on your settings mine took around 20 hours

Danielle Fourie

just curious how long is it taking to print the phoenix at %100?

Caitlin Nobles

I LOVE THIS!

Toni Detwiler

So much glue :) Thank you!

Dan

absolutely love this one!! prints beautifully

Madonna Erwin

nothing ever wrong with your prints mate. Only problems will ever be user error . Dont forget your glue ahahahahahaha

William Hargraves

imprimer a 70% au lieu des 100% est impeccable ! Juste les ailles sont un peu coller entre elle mais ça se décolle facilement. Ne pas imprimer en dessous sinon ca risque d'etre plus difficile

Cauvin Kevin

I was a little nervous about this model, but I’ve printed three so far and they print flawlessly!

Marc

Printed four of these so far, thanks for such a great model!

David Gorelick

Absolutely beautiful

Charley Jones

beautiful

Katrina Hunter

Printed great.. amazing model sir! Thank you so much for all your hard work.

Clint Vail

this was great. printed perfect first time

Alaric Otey

This and the dragon are your best models to date. Love the Phoenix.

Usman Naeem

Yeah, mine printed flawlessly first time. You did an excellent, top-rate job Dan

Zombie Saint

Check out my amazon link...all the filaments i use in marketing. This one is TTYd3D Quick changing rainbow: https://www.amazon.com/shop/flexifactory

Dan

Not sure I understand your question. File is available and ready to go :)

Dan

So excited to open this up in the slicer!

Pretzel Prints

Excellent in Beta!

Paul Robinette

Came out amazing

Andy Miller

Already gave one to my nephews! Beta printed awesome first try

Andrew Smith

You Beta this one ;-) We used a dual filament red/gold turned out another gem!

David Jon Sieben

Omg I can’t wait…. As soon as I have a free printer I’ll print it … woot woot

cutiepieme3d

i printed it love it

Jason P English

I now have 4 of them printed and all turned out perfect

Carla Schrum

Only issue I had was with the first one and that's user error nothing to do with the model i had just clean my glass bed and of course cause I was too excited to print it I forgot to put glue down still only one feather came unstuck and I caught it before I left the house luckily . Bit disappointed but I should do it properly next time and not rush 😆

William Hargraves

BTW, I wanted to add, one was at 100% the other at 85% with no issues.

Allen Smith

Awesome, I've printed 2 of the Beta's without issue, so good to know that no changes were needed!

Allen Smith

its all about tuning your printer each one needs to be setup and configured it takes time to figure out what is needed. i would start with some calibrations retract bed leveling and so on. it all takes time but its worth it

Ryan Legere

That’s awesome filament!

Darrell Hatton

im super new to the 3d printing world, Is there a certain trick to getting your prints to print smooth? mine seem to have some rough spots on the points of prints. Is there a good method to cleaning them up afterwards to help remove the little burrs and imperfections?

Chelsea Passen

just curious, how are you guys getting beta prints to run? is there something I can join to get access? If anyones willing to share - THANKS

Tony Bohn

What filament is this in the picture?

Pollyanna Wells

The legs will off balance from side to side for me, but otherwise great print!!

Corey Serrins

This is awesome!!! Hoping I can figure out my machine and make some of these. I’m loving everyone else’s prints.

Kim Radatz

It printed fine on my v2 and did the same filament as shown. Looks awesome.

Clint Vail

Printing this now using 7 colour print on the Bambu Lab X1CC. 17 hour print at 100%, hope it looks good!

Adam Nagus

Make sure that you push the feet all the way together and that shouldn't happen. Seems to stand better on surfaces that have a little give to them. Like I put one on a paper towel to take a picture and it stood up right a lot better compared to the wooden kitchen table I was using But as long as those feet are practically touching, I haven't had issues with it falling over

SirPrintsAlot3D

I use 15 with no issue, I'm sure 10 would probably be okay. I use 3 walls though

SirPrintsAlot3D

None of their models require support

SirPrintsAlot3D

My ONLY issue is that when standing him up, his feet want to give way and he falls on his belly

Ryan Sumner

What are yall using for infill on this? Can I get away with 10

Trina Fenton

Do I need supports to print it?

Vitaliy Bondarenko

Had no problems with Beta test, Not even a brim for the small wing parts. Good work!!

Andrew Acevedo

I'm so happy to hear that there were no major changes, because I may have printed a decent amount of them in hopes no one else was noticing any issues too :) Lovely print, very well done!

Shayla Anthony

It's an amazing print as expected. Never fail to impress

Dustie Chase

I have already printed both a “fire” and “ice” version already and have to say this is got to be my favorite model of all the amazing stuff that you have done. Can’t wait to print even more.

Justin Downs

Beta worked great for me.

Philip Zuniga

I’ve got one printed already and working on the next.

R&D 3D Printing

Already printing one at 200%! (Look at your FB tags)

Bland Things

Omg!!! My spirit animal no wayyyy 🥰

Shannon Demeter

Just finished mine last night of the beta version it turned out beautifully.

Tank Raptor

This is a beautiful model!

Thomas Moody

It looks and prints absolutely great

NeoKoi Prints