Ciao ragazzi!
Finally Teela is ready to be printed!
I finished the sculpture, divided the parts and made the joints for assembly.
Now I just have to make the Chitubox files and print the prototype.
However, I will send the files for those who want to try to print before t...
2023-01-11 14:23:27 +0000 UTC View Post
Ciao Ragazzi!
I thought a lot about what I could do for our Patreon's third milestone, and I finally made up my mind.
The goal is set on reaching 50 supporters and when this number is reached, I will draw one of you to receive a brand new Anycubic Photon M3 2023-01-09 14:20:13 +0000 UTC View Post
Ciao Ragazzi!
I had time to work on Leela and Amy, our next Futurama Girls!
For now I have focused on the faces and hair (only sketchy for now), especially Leela worried me a lot because of the mono eye.
However, I think I have reached a good compromise. What do you think?
2023-01-09 13:20:13 +0000 UTC View Post
UPDATE! - Some update on the design (see the gallery!), as always I've made also the NSFW version. The work goes fast and the model will be released ASAP!
I thought for a long time whether or not to give you a preview of the model I'm making for the goal of 25 subscribers.
In the ...
2023-01-05 13:14:27 +0000 UTC View PostCiao Ragazzi!!
I did a good search on Futurama Girls Amy and Leela but didn't find many good references.
Among those found I thought of these versions:
1 - Wrestlers (taken from an episode of the cartoon)
2023-01-04 09:51:11 +0000 UTC
View Post
Ciao ragazzi!
The time has finally come for the release of the Zelda model!
I'm very happy with the result, and I hope you are too!
As usual, the link to the compressed file will be sent via private message, so take a look at the email!
As always let me know what you think!
Thanks for your ...
2023-01-02 13:06:10 +0000 UTC View Post
I can hardly believe it!
With a bang, and thanks to our new subscribers, we reached the target of 26 subscribers in an instant!
I haven't had the chance (you did it too fast!) to finish the model I promised you, but we're close! It's in a very advanced stage, but I don't want to tell you more! :D
For n...
2022-12-30 18:05:50 +0000 UTC View Post
Hi boys!
Sorry for the bad video but I wanted to show you the result of the print, just removed from my Saturn!
The print is excellent and also the details, which have not yet been put under UV, are very beautiful.
More photos as soon as the pieces are assembled!
What do you think?
2022-12-29 16:10:30 +0000 UTC View PostCiao Ragazzi!
As you can see we have 3 characters on equal terms! We must therefore go back to voting to choose the girl who will be sculpted for February 2023!
This time you have only one vote each, I await the results!
Ps: voting closes tonight (12/29/2022!)
A presto!
2022-12-29 10:06:46 +0000 UTC
View Post
And here's the time!
We are again faced with the choice for the project that will see the light in February!
Also this time a lot of choices of beautiful girls, and honestly I find it hard to choose one! They are al...
2022-12-24 15:02:50 +0000 UTC View Post
Ciao ragazzi!
Between yesterday and this morning I managed to finish breaking down Zelda and inserted the pins.
Now I just have to export all the .STL and proceed with printing the prototype!
Even this sculpture is coming to an end, I can't wait to know which character awaits us for February!
See you s...
2022-12-24 14:27:25 +0000 UTC View Post
Ciao Patrons!
I take this opportunity to wish you all the best for the upcoming holidays, to be with your loved ones and to receive every possible good.
As far as I'm concerned, I'm happy to have people who believe in me and support me like you are doing right now.
Unfortunately today my father-in-law passed...
2022-12-23 16:58:12 +0000 UTC View Post
Hi Patrons!
I hope to please you by posting some test renders of our Zelda!
These are the first ones, soon I will upload many more including close ups!
Are you satisfied with the work done?
Ciao!
2022-12-21 18:59:01 +0000 UTC View Post
Good morning Patrons!
The Zelda's modeling phase can be said to be concluded! :D
I must admit that after the initial doubts about how to make the NSFW version, everything proceeded quite smoothly and the final result seems very good to me.
Now I have to fix the model and start making cuts and joints to be ab...
2022-12-21 08:28:19 +0000 UTC View Post
Good morning guys!
I need your help deciding how to make the NSFW version of Zelda.
I thought about taking off just the top of the dress and the pants to avoid too many pieces to print, but I have a big doubt.
Do I ...
2022-12-19 11:31:19 +0000 UTC View Post
Good morning my dear Patrons!
I was thinking about what reward to give for reaching the second goal of the page (which I would like to set to 25 supporters) but I can't decide what to do.
I therefore ask you for advice th...
2022-12-16 12:00:58 +0000 UTC View Post
Ciao Patrons!
As usual we are here for the new suggestion post for the February 2023 release.
As always, the runner-up in the last poll, Lara Croft, will be re-entered into the next poll.
So come on, let's see what you suggest this time!
Of course you can also repeat the same tips given above!
As...
2022-12-15 12:09:16 +0000 UTC View Post
Ciao Patrons!
Another update on our beautiful Zelda!
Finished modeling the clothes, the hand holding the Sheikah Slate (the right one) and the base. The left hand and the position of the hair remain to be reviewed. We are still in good shape!
I hope in the next few days to finish the sculpture and figure out...
2022-12-14 17:22:24 +0000 UTC View Post
Good morning Patrons!
I went a little further with Zelda, looking for a pose that could be convincing for the character. The one you see is the one I prefer. Naturally there is still a lot of work to be done to fix it definitively, but it seems to me quite convincing.
I also modeled the Sheikah Slate (the Sheikah ...
2022-12-11 15:14:36 +0000 UTC View Post
Some other work today on the face of Zelda, hair and some details. I have to work a little more on the facial expression, but I must say that as a base I am satisfied! What do you think?
2022-12-07 16:15:30 +0000 UTC View Post
Bye!
These days I've started developing the winning character of the January poll, Zelda, a character from the legendary Legend of Zelda video game series.
For now I've sketched the face and clothes, as soon as the pose is decided I'll show you more updates!
In the meantime what do you say? You like it?
2022-12-07 10:37:36 +0000 UTC View Post
Good morning dear Patrons!
Finally the printing of Athena can be said to have been successfully completed! All the parts fit together very well and I fixed some small problems found in the prototype.
Now Athena is ready for you!
Athena is divided into 27 parts (8 for the base and 19 for her) and you can asse...
2022-12-02 15:27:25 +0000 UTC View Post
Ciao Patrons!
It's finally time to add Mavis to the Welcome Pack as a gift for filling all the seats in the Early Bird subscription. As always, you will find the STL files, the Chitubox file and the CTB set for the Elegoo Saturn printer (my printer).
Hope you like it!
You'll find the file in the Welcome Pack...
2022-12-01 16:17:50 +0000 UTC View Post
ZELDA!
As you can see from the results below the winner is Zelda with 63% of the votes!
Now I just have to finish Athena and start with this new and challenging project!
As usual, thank you for your support!
2022-11-30 08:15:28 +0000 UTC
View Post
Good morning guys!
Athena is finally approaching the printing phase, yesterday I finished the disassembly and insertion of the pins for assembly.
Today I will create the Chitubox file with all supports and we will go to print as soon as possible.
This month has been pe...
2022-11-29 10:59:28 +0000 UTC View Post
Good morning guys!
Finally the poll for choosing the subject to sculpt for January 2023 ended with a dead heat! Zelda and Lara Croft are the top rated subjects as you can see from the poll results...
<... 2022-11-29 10:46:02 +0000 UTC View Post
Ciao my Patrons!
The tips post was a hit with lots of suggestions from you, all very suggestive.
And here is the poll to choose your suggestion for the January 2023 sculpture!
As you know, here are some of the best ...
2022-11-25 16:16:11 +0000 UTC View Post
Some news on Athena!
The two type bottom body is done, changed to little the expression of the face and finished the base.
Some work is to do on the sculpt to reach the final file
i'll work hard to make she beautiful! :D
Please let me say what you think!
2022-11-21 16:17:23 +0000 UTC View PostI'm undecided whether to make a body with underwear or not. What do you say? do we do one naked body or two versions with underwear?
Good morning guys!
Here we are at the second post of tips on this page!
As you know, you have the opportunity to give all the suggestions you want for the next sculptures, which will then be put to the vote in a dedicated survey!
As I mentioned, I would like to re-propose the second-placed ideas in the last ...
2022-11-16 08:13:20 +0000 UTC View Post
