Trying to keep the patreon page updated as much as the facebook page at least every week, but seems I still screwed that up too last week :)
A few releases up from last time, we have the Alien Queen Wall hanger (multiple parts+full) the 1:12 scale beskar container (ignore text saying 1:6) but it can be rescaled to full...
A decent start to december, but still have many models to get out this month!
I'll keep this post short and sweet as I have much to do, but thanks to all the new Patrons who have signed up especially even since the start of december, you guys keep coming, i'll keep making more models!
Next one up wlll ...
2019-12-06 07:53:52 +0000 UTC View Post
I promised I would be active in updating this page as much as the facebook group, so I apologize in advance to those who have already downloaded these. I'm sort of heading in a funko pop type direction, i have heaps of great ideas for them and they are good quick fun sculpts when you need a warm up for the day.
If you ...
Sorry guys, just trying to sort the download server out. there was simply too many people trying to download the entire archive at once, The files are not going anywhere, no need to grab it all in one hit!
For the time being I will just attach files to the posts as Yoda V2 is was literally about to go up when the ...
2019-11-20 06:14:51 +0000 UTC View PostFirstly, Hi, welcome and thank you for joining us here on the Hex3D patreon page. If anyone has joined in the past 4-5 hours I will be setting your download accounts up immediately after this message.
I'm in AU timezone GMT+10, so yes on the odd occasion people will sign up when i'm...
2019-11-19 21:48:44 +0000 UTC View Post
Everyone should have received their login information via email to download the files, if not please let me know here or on the facebook page.
While we have so many new patrons, the server might be a tad slow so try and queue a few files at a time rather than all three years of it at once. I am switching t...
Will require some supports under the chin and in the skull cavity but shouldnt be too much.
Uploaded to the server, Happy Printing!
Hi all,
I just wanted to give a heads up to those that don't facebook. I live in an area in NSW that is currently being hit hard by by bush fires.
We still have power, the winds are blowing away from us so im hoping all will stay well but I thought I should post here and let you guys know.
I a...
2019-11-11 07:44:08 +0000 UTC View Post
Yes, it was November 2016 when we started. Hard to believe it, time has flown! Amazingly some of you who have been here since day one are still here and I haven’t turned you off (yet ! lol)
I want to apologize for not posting on here and focusing on the facebook page too much. I need to be bette...
2019-11-02 07:19:33 +0000 UTC View PostYou arrived at a good time as this afternoon new tiers are being added and new members will need to wait a 3 month period before having access to the archive of all releases, but you got in just before that so you will full access. If you know anyone who might be interested in subscribing here, they have about 8 hours from th...
2019-09-03 23:12:33 +0000 UTC View Post
The smaller scale version has been uploaded to the server, I will continue to work on the 1:1 scale and fix a few things up for when this is printed that large.
I have a 16cm high print about half way through now, am looking forward to getting back into painting.
Happy Printing!
Hi All,
It seems many of the issues I am facing with corruption with files is actually due to people queuing up the entire archive of files and downloading them in one go. While that I don't mind, this is not what it was designed for. We are getting on 9 Gigs of files so it does lag the server a bit when its all gettin...
Just uploaded to the server, assembly instructions included, enjoy :)
2019-08-27 18:47:50 +0000 UTC View PostJust small note to let you know the login information has been emailed to you so if you did not receive it, please let me know.
**Discord
Yes, I'll be starting a discord for users this month, more to come later this week.
August will see the completion of the Droideka, the start of another 2 larg...
Yes, we now can add multiple images to a post! (took them long enough...) Hopefully we can start making the place a little more presentable.
I have been working on a few things this month like getting thumbnails added to the server downloads so you can see a preview of what you are about to get. I'll have to tak...
This comprises of a few parts, so be warned. I have cut them for minimal supports and to increase the amount of machines it can be printed on. The exception is the back of the scoop where the long cut-out sections are approx 34cm high.
This will require a fair amount of filament. Many of the parts were bulked up from w...
Get your Cr-10s5's warmed up. This is a relatively easy print but its large! feel free to cut it up smaller if you need, but it is fitted comfortably for printing on a large scale printer with a 500mm build plate. All parts are nice and flat and should require minimal supports.
The helmet slips over the top of the head...
This is a big pack! sorry it took so long but you will understand why when you unzip it. Files are located on the members depot and this has also been included in the starter pack!
Full versions included for SLA printing and anyone who doesnt want to assembly but there is also Ender 3 cuts and Cr-10 size cuts.
T...
Just uploaded, I do warn it is detailed, slicers might chug a little...
Look in the Helmets/Starwars Buckets category in the file repository.
Happy Printing!
All older files including this one can be found on the Members Depot:
https://...
Decided to take a break for an hour from the many parts organizing and repairing that is the arc reactors, did a cut bust finished of the Darklord (I really wanted to test out this new photon..)
He has been uploaded to the Busts and Figures category, everyone should hav...
2019-04-11 07:22:58 +0000 UTC View Post*BEFORE YOU POST YOU HAVE NOT RECEIVED YOUR LINK, PLEASE CHECK YOUR JUNK OR SPAM MAIL FOLDER.
All accounts are setup for you to download the models for your tier. As promised, anyone who signed up before the cut off date (and I did extend that until right now because I was a little late this month) so everyone who...
2019-04-06 08:04:19 +0000 UTC View Post
"What's in there?"
"Only what you take with you..."
The first of a few Dagobah inspired prints this month..
Sorry for the last couple days delay, had a bit of an issue with my feet and ankles doing some weird swelling stuff (like to the point of not being able to walk...) , no idea what it is... possibly just...
**Updated***
New key config, fixed hair/torso, head back to separate
My internet is fairly slow at the moment but I will upload the one piece figure, this is the 3 piece, base/legs + body/head/earpiece + right arm.
New site is done, will start rolling out logins soon, probably 20-30 members at a time to...
All Patreon download
Just getting alot of models organised in the new system, please bare with me a day or so! I've been super busy getting everything all ready so i've been a bit quiet last few days)
This was a super quick model to make (as most of the detail wouldn't be visible when printed at 3cm scale) Supe...
*Files can be found in the Member Depot*
The rest of the armor will be added to this post. I want to get 2-3 times out this month than I did last month and the best way for me to increase workflow is to not spend time cutting and keying models. If its a bust/figure yeah I probably always will but to not have to ...
Will add the staff to this upload when its finished, otherwise rest is done. Anything not printable is pretty much leather belts so unless theres anything extra I missed this should be the lot.
This is uncut
I get more requests to give people the uncut models these days rather than the cut ones since everyones ...
Just a quick one, included are dual extrusions (ignore filename, they're not fighting...) hollow bottles, bottles without octopus, spiral vase modes... you name it. The only tricky print is the octopus by itself, but its not impossible, but ive included plenty of versions if that one is giving you grief.
I'll be foc...
2019-02-19 06:33:51 +0000 UTC View Post
*Files can be found in the Member Depot*
Since the swords seemed popular, i'll throw another on in. They are pretty fast to make in comparison to helmets and wearables and thanks to the real sword market, plenty of good reference photos of real swords to stock up on.
Very easy print, its technically a...
Welcome new members!
If you have not seen the post (which is understandable as there is a few posts...) we have a facebook group where we share our prints and tips, I also put a lot of upcoming release previews in there.
I get that facebook is not for everyone! I really do, and If I could avoid it I would but fo...
