Marko Makaj

Go go, Loki ranger !!!

You thought I was done with Loki right ? :D

Something you might not be expecting, but still I trust you will like :) 

The Loki Power Rangers mashup helmet !!!  The concept behind the ida was shared about a week ago all over social media, and I managed to contact the artist behind the concept and h...

Santa's dark side :D

Ho Ho Ho :)  

There is rumour that Santa is actually a big fan of Anakin,  and everyone that ends up on his noughty list will be dealt with a  CANDY CANE LIGHTSABER  !!!!!  :D  Just joking of course, but I just had to make a Christmas themed lightsaber :)

As always I designed it so...

The Rocketeer

For this months iconic movie props, i’ve decided to with a classic :) The rocketeer helmet :)

It was quite a fun one to make, especially all the “welding” details :) It should be as close as possible to the screen accurate one, except minor change on the “fin / tail” - so that part is made to be easier for 3...

Invincible

Season 2 of Invincible is finally here, and if you like the show like i do, you most likely allready watched all the new episodes :)

Anyways, Omni man, one of the best “superheroes” out there, is just one of those things that had to be done :)  I did the statue of Mark looong time ago,  but such a huge ...

Lord Starkiller , smooth and shiny :)

One of the most badass characters in SW universe, no doubt :)

Lord Starkiller helmet, inspired by The force unleashed game. The helmet shape is without a doubt one of the nicest looking ones out there, so i can't wait to print this :)

The "ear" pieces are designed in a way they dont need support, as well the "...

Lightsaber mod for new chasis !!

Good news for everyone who got sent the new lightsaber chasis.  Well, FREE DOWNLOAD UPDATE for everyone  at the end of the post !! :)

I have created a mod that is completelly non destructive, meaning it doesnt require you to take the electronics apart so your warranty is safe , no special skill needed, and t...

Links sent, and new project added :)

That's right :) the LInks for December 2023 have been sent out - they should be with you soon ( in case they are not just yet, please wait a bit, but they will arrive soon)

In the folder you will find a new project (so far this is the 3rd this month) , and its basicly 2 in 1 :)

Quite a few people have been ask...

Project files with a story ? yes, ebook included :)

Ready to make history ? :) I thank you all for participating in what just might be the first christmas story about 3d printing ever created - included as an ebook for all my patreon members :) 

First, a big thank you to Jonathan Lambert for suggesting a "Santa's button" file, however that gave me an even bigger id...

Hello there .... (finish the sentence :D )

Hello there :D  - DOWNLOAD LINK AT THE END OF THE POST

Hello there to a new month on patreon, as well to the General Kenobi armor :)

This is an armor i wanted to make for a very long time now, and  finally managed to complete it

It has a few extras like the belt buckle that is articulated, and...

Model 13 blaster

Aaaand another blaster is added to the Jedi survivor modular blaster set :) So far there are 6 blasters now, so only few more left. Im also printing some of them and will share some videos soon :)

Model 13 blaster, as the other ones, is also split into 3 parts that you can combine with all the previous blater parts, so...

The red grail !!!

After all the large full scale props, I figured I'd make one that fits easily on any printer and is super easy to print... aaaand looks cool :)

Again, something warhammer themed - The Red Grail - a skull themed goblet with parts split so it's easy to print.

And another cool thing is that the entire print can ...

Azog’s mace

The full size props mood continues :) However, it's been a while since I've created a prop that can uses real life objects to complete the build, and this one felt just perfect for it :)

Add to “we are makers” november folder for download

Azog's mace, there are 2 options included:

Full size 1:1 scale , ...

Just a little POWER SWORD :D

Can't help it guys :) these large props have taken over me :D

There are so many things to choose from, and since I already made the Chainsword, 2 chain axes, thunder hammer, the Great Cleaver of Khorne, Crozis Arcanum, and some stamps, this time I went with a power sword :)

Again so many to choose from, but I ...

LOKI - God of all time

Loki GOAT ( God of all time) crown :) ready for download :)

a great way to end the series and a fantastic prop. Those large horns were a bit scary to make at first but i think i managed to make it all balanced and wearable

Full disclosure - as you most likely noticed the available photos/references are a bit blurr...

2 Small updates :)

Just 2 quick updates :)

1 - the gladiator helmet now has a 3mf file included pre sliced the way i printed it - my test print is done, it came out fantastic, will post a video of it soon, so if you have bambu lab printers you can use the 3mf file - also, keep in mind different parts are printed with different resolution ...

Corzius Arcanum ready for download

There's been a while until we had a large 2 handed prop, and what would be better than warhammer :D

I'm working on a few models, here is the first of them

Corzius Arcanum, I added a bit of my own twist into it, so I hope you'll like it.

The entire thing is about 70 cm long, so it's not super huge, but ...

Are you not entertained ??? :D

A while back I mentioned I would like to make more of some of the iconic movie props, and this is one that I wanted to make for a while now :)

The iconic Gladiator helmet is now ready for download in the November 2023 folder for “we are makers” tier members

The shapes were quite interesting to work with a...

Another armor :)

EDIT - Patreon is (again) experiencing some glitches in the messaging system, the links have been sent out, so i kindly ask for a bit more patience until they are "delievered". This part is out of my hands now, but im sure it will be sorted out very soon, thank you !!!!!!!!!!!

_______________________________________ 2023-11-06 19:14:16 +0000 UTC View Post

Can't have too many lightsabers :)

DOWNLOAD LINK AT THE END OF THE POST

Just wanted to mention that at the moment I am working on the Shin Hati armor, so  while you wait on that, here is a little "simple" in between projects,+ that I think you will like :)

Anakin's lightsaber is one of the most known items in the prop making world. However ...

The professor has arrived

DOWNLOAD LINK AT THE END OF THE POST :   

As we all know some projects take longer than others. Well, this was one of them. I have been working on this one for the past 7 days, trying to get the details and proportions right and did my best to break it down in a way it would feel like building a real droid. &...

More halloween :D

Continuing the halloween / grim reaper mood :D

So, let me ask you, what's more scary than a grim reaper ? A grim reaper with a lightsaber :D

For some weird reason I had this idea in my head of a grim reaper slicing souls with a lightsaber. yeah ,not sure if weird or not, you decide :D haha

I didn't wan...

Grim Reaper trooper helmet

So, What kind of Halloween would it be without a mysterymakers star wars halloween model ??? :D

With all the new troopers we got to see in Ahsoka, i wanted to create my own version, so i'm calling this one the grim reaper trooper helmet

The helmet is ofc fully wearable,  wall thickness is 3.5 mm at 100% sca...

The blade of Talzin

A quick Sunday sculpt, and one of the newest items we got to see in the last episode of Ahsoka,

The blade of Talzin.

This blade is rather large , so it split into grip and blade parts, with a 10mm hollow dowel/rod insert along the middle of the blade

The grip section is also split into parts by material so t...

Ezra's new lightsaber

The lightsaber mood continues :)

This time Ezra's new lightsaber as seen in the final episode of Ahsoka.

As before included are functional and non functional options.

Something different with the non functional one is i separated all parts to be easy to print by color and parts split in a similar way we...

Pommel accuracy update

There has been some discussion in the Baylan Skoll builders group that the pommel part has 4 "straight cut shapes" , instead of all round.

Soooo , i created that version as well, both clean and added the "textured" version as well that is the closest to the one we saw on display :)

The cool thing is, if you are...

Sabine paint sprayer

A little extra inbetween projects :) This one kind of snuck itself past us, but many of us did catch it later :) the famos sabine’s paint sprayer, tv series/ahsoka version

I thought it wuld be cool to have the little knobs be functional, so i designed it in a way you can twrist those however you see fit :)

it...

K3 Vindicator added to "build your own blaster"

The build your own blaster from "jedi survivor" continues. I was hoping to keep adding 1 or 2 of these each month until the set is completed ( there will be total of 12 blasters) , so for now we are at 5 :)

For those who just joined mid project, let's recap - the idea is to have modular blasters who's parts you can pr...

Thank you Ray !!!!

Without a doubt my favourite character in the Ahsoka series  :)  And i know you have been waiting on this one :)

The links are being sent out, so you should have access to it soon if you are a "we are makers" tier member :)

I loved the opportunity to be able to make some more micro damaged / textured...

Another lightsaber and a “sneak peek” photo :)

While we wait on Baylan’s armor, i figured i’d give you another item to print, and it was only obvious it would be Shin’s lightsaber :)

You can also see a little “work in progress” of baylan’s gauntlets, they will be getting textures, and the other armor parts are almost done as well, im just looking forwa...

Lightsaber build guide ! - photos are screenshots only

I have created a pdf file with a detailed explanation on how the lightsaber i use, works, what you get with it, how to take it apart and how to insert the electronics into the 3d printed one :) Next to that i have also made a little assembly video of the new Baylan lightsaber in case you wish to see how to insert the electron...