Meanwhile, Nic is adding the finishing touches to the Teak grating that will be in the head. This particular project has been a long time in the works, mainly in-between more critical tasks. It looks beautiful!
2024-03-29 22:54:27 +0000 UTC View Post
Just in case anyone was wondering, there is still a LOT to do! Today Patrick is planing some white oak (offcuts from milling the deck beams all those years ago!) for a pretty big project in the forepeak - constructing the chain locker / spurling pipe.
2024-03-28 19:22:34 +0000 UTC View Post
These winches have been a long time coming, but there's been a lot of preparation and other jobs that had to happen before we could fasten these down on deck. These will be used for controlling sheets and running backstays, among various other things.
2024-03-27 22:58:53 +0000 UTC View Post
Tally Ho's sails are going to be a transatlantic collaboration, which seems entirely fitting for this project. I'm really excited to be working with 2 fantastic sail-lofts - Ratsey & Lapthorne in the UK, and NW Sails and Canvas here in Port Townsend.
I'll be posting in more detail about each of these lofts soon - bu...
2024-03-21 18:02:21 +0000 UTC View Post
Help needed! We need to transport Tally Ho's Capstan from Georgia to Washington state - nearly 3000 miles across the USA.
Keith Rucker has been doing a fantastic job working on Tally Ho's capstan, and has been making detailed videos of the process so far - linked above is the latest video, do check it out if you'r...
2024-03-18 22:59:38 +0000 UTC View Post
In this episode we raise the topmast - this is an interesting operation because we are raising the top of the spar much higher than any of our hoisting points. I explain how it’s done and then we get on with it! After that Bob and I climb the rig to take a closer look and install the wind instrument.
---
D...
2024-03-16 17:07:46 +0000 UTC View Post
It's time to put the topmast up! Here we are just hoisting it from the ground up to deck, where we will re-rig it to hoist up through the doublings to protrude above the lower mast and extend the height of the rig by around 20'. The spar is hollow spruce, so it's very light for it's size!
2024-03-12 21:06:47 +0000 UTC View Post
Well, it was so nice having the boat in "show-mode" for a couple of days! It's all covered up again now and the cushions have been removed, but we got some good photos first.
One question remains - what shall put on the big bulkhead above the settee?!
2024-03-07 21:15:49 +0000 UTC View Post
In this episode we take a look at lots of ongoing and completed projects inside the boat. Leather upholstery, mirrors, lamps, and a liquor cabinet with backlit stained glass! Finally we remove all the covers and tape to get a real look at the progress in the interior of the boat so far.
---
Music;
Mino...
2024-03-02 18:04:07 +0000 UTC View Post
Zeal has been making a very nice custom tool cabinet in the engine room. We were planning to just mount a toolbox in here but there wasn't quite enough room between the fuel tank and the bulkhead, so we just took the drawers out and built a custom cabinet around them! These shallow metal drawers are great for mechanical tools...
2024-02-29 23:04:20 +0000 UTC View Post
In this episode we attempt to run out the bowsprit… several times! But things do not go quite as planned.
---
Music;
End of Summer - The 126ers
Five Card Shuffle - Kevin MacLeod
Wayward Jane - Lyra's Tune
We finally decided on a tile design for the woodburner alcove / heat-shield - what do you guys think?!
Luckily we have a resident ceramics expert to lay the tile and grout the seams. We are mounting the tile on cement-board for extra heat protection, and also for ease of installation and disassembly.
2024-02-23 22:12:00 +0000 UTC View Post
I'm not sure if we chose the easiest or the hardest way to lift the bowsprit on board..... Captions please!
2024-02-23 00:15:14 +0000 UTC View Post
Is it really a classic yacht if there isn't a teak grate somewhere onboard?! Nic has been doing a great job putting this together - but where will it live, do you think?
2024-02-19 23:54:54 +0000 UTC View Post
In this episode we catch up with a lot of work that Bob has been doing modifying and adding to the “bitts” or the “samson posts”, to accept the heel of the bowsprit. We also catch up with the rest of the team and their various jobs, and even take a glimpse into the world of the duchess.
---
Front Por...
2024-02-17 18:12:00 +0000 UTC View Post
We have some really beautiful and functional woodwork coming up on tomorrows video! This perspective may be a little confusing, does anyone know what we are looking at here?
(wrong answers also encouraged)
2024-02-16 23:22:06 +0000 UTC View Post
This photo may not look like that much, but for me it's extremely exciting! This is the new Gypsy for Tally Ho's original Capstan. This piece will grab the links of chain and hold on to them while the capstan rotates, thus pulling the chain and anchor in towards the boat. This Gypsy is custom-made to fit our specific chain an...
2024-02-14 23:01:21 +0000 UTC View Post
These shots are from our last crew sail in the fall / autumn, with our friend Amber (Sail Port Townsend). Who knows, perhaps sometime this year we will be out there sailing Tally Ho?!
First photo is on 35mm film, 2nd photo is a still from drone-footage.
George has been using the awesome old Newman planer to process lots more old teak Tally Ho planking stock. Any guesses on what he's making with it?! ...it'll be a prominent feature on board!
2024-02-09 17:26:19 +0000 UTC View Post
David and Bailey apply the final coat of finish to the bowsprit! This spar will be ready to run out over the bow of Tally Ho very soon.
We are using AWLWOOD to finish our spars, which is a more modern product than we are using elsewhere. Although it's a bit more technical to apply, it should be much more chafe-resistant...
2024-02-08 23:17:55 +0000 UTC View Post
More beautiful bronze hardware for the rig, made by Port Townsend Foundry. This is the gaff saddle, shown here mounted temporarily to confirm some measurements for the sailmakers. Eventually the gaff will be mounted in the bell-shaped piece, and this hardware will hold it in place against the mast and be hoisted (with the gaf...
2024-02-07 00:06:55 +0000 UTC View Post
I haven't been posting so many updates between videos recently - not intentionally, but the project is just so busy that it can be really hard to find the time for it! But I'm really going to try to post more regularly again. Here are some fun photos from a couple of months ago when Zeal and Patrick reconstructed the mezzanin...
2024-02-05 18:46:50 +0000 UTC View Post
In this episode we start turning on systems in the boat - starting with the diesel-heating system. We also turn on the fridge and freezer, and the galley lighting! Nic fits handles and locks in the doors, Patty cuts another hole in the deck, and Leo fits a large monitor in the Nav station.
---
Music;
K...
2024-02-03 19:15:48 +0000 UTC View Post
The finishing booth is very busy at the moment! What can you see in here?
Here's a very short video of the process!
The full video can be found here - https://youtu.be/GMrkrKREIpI
2024-01-23 22:19:23 +0000 UTC View Post
In this episode we catch up more thoroughly with progress on restoring Tally Ho’s capstan, and we also check out a fancy new cabinet installed in the head.
---
Music;
Low Tide - Silent Partner
Blues Infusion - Quincas Moreira
Torrance Sunset - Dan Lebowitz
In this episode Nic builds the chart table, and the nav area takes shape!
---
Music;
Be Bop 25 - Audionautix
Come and Get It! - Dan Lebowitz
The Trapezist - Quincas Moreira
Llena de Plena - Jimmy Fontanez / Media Right Productions
2024-01-13 19:02:09 +0000 UTC View Post
Most of the team is back at work now and things are getting moving again! Here we see an almost-finished bronze cap on a fife rail post, courtesy of Zeal. The main purpose of these caps is to cover and protect the end-grain of the posts (and to look really cool, obviously).
I see a lot of comments about lining up ...
2024-01-08 21:33:49 +0000 UTC View Post
In this episode we visit the Brion Toss Rigging workshop and go through the steps involved in building Tally Ho’s standing rig. We see leatherwork, splicing, serving (including “throwing” the serving mallet), and setting the splice using a hydraulic ram.
---
Music;
A Caring Friend - Bad Snacks 2024-01-06 18:02:14 +0000 UTC View Post
After a quick trip to the UK for the holidays, I'm back in Port Townsend and excited to get back to work on Tally Ho. We had our first team meeting of 2024 earlier today, and we've got a lot to look forward to this year, hopefully!
