Let’s rewind a few months to a time where the resin flowed in abundance… I’m talking about when we were working on Meatball, the pumpkin we encased in resin. As y’all might recall, because we were doing such deep/thick pours, we had to use a special super slow cure resin.
2023-04-23 19:44:30 +0000 UTC
View Post
It’s so fun to have a new hobby/skill in the repertoire! In this Aftershow we talk about…
- A longer and more nuanced review of the kits (and why it was hard to give during our video)
- How bad was the cheap stuff really… (Evan rant)
- Why we chose to do stained glass
- How stained glass compares to resin...
So I was a little intimidated by the thought of grinding the glass down. How hard would it be to hold all my tiny pieces? Would it be super messy? Would I be able to get the precision I wanted? Would the glass chip? All in all, turns out it was not too difficult to do everything I wanted to do. I just took a long time haha. 2023-04-16 15:53:00 +0000 UTC View Post
So as y’all know, due to the results of the sacred “cheap vs expensive” rock paper scissors match, Evan got the cheap kit and I got the expensive kit. Not gonna lie - the expensive kit is a *little* intimidating. I mean just look at all the stuff it came with!
2023-04-13 20:31:41 +0000 UTC
View Post
Hey y’all! So we’ve made some progress on the “Cheap vs Expensive” stained glass kits, specifically on the cheap one. As per usual, we did rock paper scissors to decide who got what and Evan ended up with the cheap kit for the 4th time in a row haha.
2023-04-10 18:33:14 +0000 UTC
View Post
A while back y’all might remember us saying that we really got the itch to go to Vegas after watching Safiya and Tyler’s videos staying at all the hotels on the Vegas strip. We hadn’t been on a “just us” (not for work, not for family) vacation since we started the channel over 6 years ago, and the urge just hit us. ...
2023-04-07 20:17:19 +0000 UTC View Post
And since it’s our first time, we thought it’d be fun to do another “cheap vs expensive” where we buy a cheap kit and an expensive kit and test the 2 against each other.
I gotta admit - the expensive kit is INTENSE on ...
2023-04-02 15:22:52 +0000 UTC View Post
Happy Friday y'all! In this Aftershow we cover:
Hey guys! We finished the glowing garden and I think it turned out really cool! Both in “dark mode” and in “light mode.” Here’s the same angle so you can really compare the two.
2023-03-28 15:31:51 +0000 UTC
View Post
So first off, Evan’s rotisserie was a success! (check out our last Patreon post for context). It held the weight of our heavy planter and we ended up with a smooth resin finish that’s still thick enough to glow when in the dark.
While thinking about the design of this “garden,” one idea we had is we want it to l...
2023-03-25 16:33:17 +0000 UTC View Post
So as part of the "glow in the dark garden" our AI friend Echo has us working on, we wanted to make a glow in the dark planter to house everything. We of course went to the thought of covering it with resin... but how do we keep the resin on while it cures? If we do a pour over then most of the resin would drip off. We though...
2023-03-22 18:30:34 +0000 UTC View Post
You guys might remember a while back we asked y’all to name a little talking robot we were building for a future “AI Chooses our DIY Project” video. First off, we decided to name him Echo, so thank you Aaron for the suggestion (they asked ChatGPT what the name should be so it really came full circle).
Also, we’v...
2023-03-19 15:39:25 +0000 UTC View Post
Thank you for submitting all the questions! If y’all like this, we’d love to answer more. There were so many good ones we couldn’t get to (because apparently we like to give long answers and we ran out of time haha) -Katelyn
2023-03-16 17:12:42 +0000 UTC View Post
For so long we’ve wanted to buy resin gadgets and test them out to see if they really work. So I did a bit of research and I’m gonna surprise Katelyn with some interesting tools/gadgets/toys I found…
I bought a few different mixing devices, 2 of which are supposed to be hands-free, AND I got a heating mat that’s...
2023-03-13 14:56:52 +0000 UTC View Post
Hey y’all, hope everyone has had a great week! We had SO much fun with this project. In this Aftershow we talk about:
Hi y'all, we realized it's been over 2 years since our last Q&A and a lot has changed since then! We're not sure if we're ready to boot up our podcast again so we though we'd do a Q&A video just for our supporters. Leave your questions below and upvote your favorites for us to see!
2023-03-08 20:58:44 +0000 UTC View Post
We lugged the 63 lb candle (yep, we weighed it) to my parents house and burned it!! This thing burned like a champ.
We had it going for like an hour and it only went through maybe 1-1.5 inches of wax, but I can’t say it was ...
2023-03-07 16:40:10 +0000 UTC View Post
We thought before we burned the candle, it would be a good idea to make a giant candle snuffer. We’re also gonna bring a fire blanket and a fire extinguisher, but a big snuffer seemed the least messy way to put it out.
We got a trash can lid, and first we tried drilling holes through the handle and adding a metal rod....
2023-03-03 16:31:08 +0000 UTC View Post
Well that might be a little melodramatic. Basically, we accidentally prematurely popped off the template while trying to loosen it from some hardened wax that had spilled on top of it.
2023-02-28 20:29:11 +0000 UTC
View Post
How are we gonna place 1000 wicks? With a laser cut template of course! The tricky part was we wanted to make a template that served 2 purposes: 1) it would allow us to space out the wick bases when we adhesive them to the bottom.
2023-02-25 15:35:42 +0000 UTC
View Post
Hey guys! So we’re making another oversized project, but this time we’re gonna set it on fire… because it’s gonna be a candle. With 1000 wicks. That's a lot of wicks!
We bought 40 lbs of wax and I worry it may not be e...
2023-02-21 15:59:02 +0000 UTC View Post
We’re exhausted… but SO happy with how this laptop turned out! So it was all worth it in the end. In this Aftershow we talk about…
Omg we did it! It’s done and it works!! We’ve put in so much time into this giant laptop, and we’re really happy with how it turned out (despite all the bumps in the road haha). It’s so crazy… it kinda looks photoshopped when you see it in pictures.
2023-02-12 16:42:31 +0000 UTC
View Post
Hey guys! Wow since we last checked in about the laptop there have been several failures. First off, mounting the screen was pretty tough and we realized partway through that it was actually crooked AND off center.
So we remov...
2023-02-08 22:33:03 +0000 UTC View Post
Hey guys! We’ve been making good progress on the giant laptop project, and we’re also realizing it’s gonna be a lot more work than expected. We’ve added a few elements that are starting to really bring the vision together - especially this 43” monitor and MASSIVE keyboard
2023-02-05 21:39:16 +0000 UTC
View Post
Our next project is gonna be a strange one! See, Evan has always had an obsession with tiny computers (I remember back in college playing smash with him on one of his early ones) and for a while he’s wanted to try making one, but getting electronics really tiny is a challenge. You know what’s way more doable? Making a GIA...
2023-02-01 16:00:05 +0000 UTC View Post
Not sure if/when this video will happen but we’re gonna be running some experiments soon! Let us know your name suggestions in the comments (and like/heart your faves) -Katelyn
2023-01-29 19:49:58 +0000 UTC View Post
It was so fun doing this resin axe, even though it turned out a bit different than we expected! In this Aftershow we cover:
Hey guys! This is a little bit of a different type of post, but we thought it’d be fun to share some non-work related stuff. First off, I’m SO BORED with my hair. I’m considering coloring it AND getting bangs (though maybe I should do one thing at a time haha). I actually bought a few wigs to try out the colors I’m co...
2023-01-24 17:40:37 +0000 UTC View Post
Hey guys! The resin axe is all complete! Now I’ll admit, while I am proud of making a resin axe, it didn’t exactly end up looking like our vision (at least in the daylight). Even after multiple rounds of tests, resin lava was hard to do.
2023-01-21 16:39:28 +0000 UTC
View Post
