Mark 2 Design

ThunderMachine Update

Still making tweaks and changes to the design. I'm having circuit boards made to control the LEDs. Ultimately, there will be several parts of the design that have 2 or 3 versions. An FDM version, a DLP version, and an electronics version. I'll include schematics with the files so if you want to create the working LED flood li...

Hardball's Rapid Fire Grenade Launcher

Good morning! I do apologize for the delay. Attached are the.stl files for Hardball's grenade launcher. Enjoy!

Thunder Machine update

The Thunder Machine render above is from last February. The model has undergone significant changes since then. I did a few quick "in canvas" renders of the new hood. It just has a much better shape. Test printing started today.

-Mark

Etsy store restock

I have some new items up on the Etsy store along with some old favorites. I'll get these files uploaded here tomorrow.

www.etsy.com/shop/Mark2Design

1979 Pontiac Trans Am

Back on October 30th, I did a test print for the hood of the Thunder Machine. Its a bit blocky, I kept it pretty close to the original toy. In my minds eye I always pictured Thrasher being very proud of that specific part of the Thunder Machine, it being the only part he bothered to wash or polish. I'm thinking now about rede...

The December Plan

I've finished up working on some new items for Action Force and a 1:18 scale line that I can't talk about but I'm sure you will all hear about soon. I'll spend the next 2 or 3 days preparing for an Etsy store restock and holiday sale. After that, I finish up the 1:12 scale Thunder Machine and then immediately on to the next p...

Just me rambling

I have a list in my head of projects that I want to do. For example. The very short list is (after the thunder machine) the  Silver Mirage, The A.S.P., The IMP, the Conquest X-30, the POGO, and the S.L.A.M. The Swamp Fire was on there but someone just made a really nice one. We will see. I also want to start doing Mobile...

Busy busy busy

Hey everyone. I've been very busy the last few weeks. I'm thrilled to announce that I am now contributing to 4 different action figure lines and I am knee deep in some work for Action Force and a new 3 3/4 line being developed. 

This has slowed down my progress on the Thunder Machine slightly but I am still hopeful...

Get your MMS Files here!

Below are the .stl files for the G.I. JOE Mobile Missile System (MMS) that I created for the G.I. JOE 3D Printing Podcast last month. They are also available in the G.I. JOE 3D Printing Facebook group and Thingiverse.

XMLR Variant .stl Files here!

The XMLR variants I designed for Assembly Required 2022 are available below. They are in 1:12 scale for classified figures. These files are for personal use only. ENJOY!

XMLR Variants

Tomorrow I will be posting the .stl files for all 13 of the XMLR variants that I designed for Assembly Required 2022. I do ask that you only print them for personal use.

Another XMLR variant

Here is another XMLR variant that I made for the Assembly Required G.I. JOE Con this weekend in Des Moines. I'll be heading out very early Friday morning. Its going  to be one hell of a one day drive but I'm glad that I get to transport my stuff myself. 

Test Print

This is an FDM test print of the hood for the Thunder Machine. I think that I need to scale it up just a bit.

October STL Club files

Thank you for supporting our efforts.  Please enjoy the files for the Ferret!

Successful Split

My past attempts to split large prints like this did not work out. For whatever reason this one did so I will have the split file included with the download folder as an option. I also created the storage space behind the seat, and some detail cuts on the foot rest that were not on my original design. I plan to have the files...

Sneak Peek

I'm hard at work on the next 1:12 scale vehicle project. This will be the most complicated print that I have ever done. The police light assemble on top alone is 15 separate pieces. 

Ferret Test Prints

I'm going to include these optional files with the Ferret. Based on the Ferret prototype that was seen in the original toy commercial and the back of the original packaging. Also updating the body to add the storage cover. I wasn't originally concerned with it but we can save some material by having this open space. 

Ferret STL Files

The G.I. JOE/Cobra Ferret pictured above was the first that I was able to complete. The whole project cost well over $1000 to get to this point. Based on this first build I  have made a few tweaks to the design and I am test printing them now. Once I am happy with the files I will upload them here for Patrons in the STL ...

Building the Ferret Part: 2 Tires

Its the tire video! Hurray! This may seem like a simple thing but it can really make or break the project.

Building the Ferret Part: 1

In part 1 of the Ferret series, I discuss the plan for how I'm going to assemble this project.

Guess who's variant this XMLR is for?

This is another of the 1:12 scale XMLR variants I created for this years Assembly Required. 

Finishing an FDM Print

I haven't finished many FDM prints. I started getting serious with this one about a week ago. Many coats of glazing putty, filler primer and sandable primer to get to this point and it is not perfect. Still, I am happy with the results and cant wait to do some detailing and finally put this thing together. 

I wante...

Assembly Required

November 5th and 6th 2022 is the 11th year of the Assemble Required G.I. JOE Show in Des Moines Iowa. The Show is put on by Codename Iowa. They reached out to me about a month ago looking for permission to use my original (Tinkercad version) XMLR-3A file from Thingiverse as the basis for a CON Exclusive weapon set. As I am mi...

State of the Art

Last night I was the special guest on Unboxing Art's new show "State of the Art". I had a blast talking G.I. JOE and action figure collecting. Check it out!

Mark's Ultimate Guide to Waterslide Decals

Lots of good information about DIY waterslide decals and how to get the best results with them. This is the first video that I have done in a while and it shows. Clouds were playing havoc with my lighting. Practice makes perfect though. I hope that you find it helpful. 

Live tonight w/Toy Habits!

Tonight will be the second attempt at my guest spot on Toy Habits. We had some audio issues last week that have been resolved. Can't wait!  

G.I. JOE 3D Printing Podcast Episode: 12

This Saturday I will be hosting the G.I. JOE 3D Printing Podcast with special guest Giles Gifford (@yojoearah). Artwann, Mike, Giles and I will talk about the finer details of paining your project. 

JOELANTA 2022

I have a vendor table set up at JOELANTA 2022! Primarily to get the word out about Mark2Toys and the Weapon Sets A & B but also to let folks know about my new push to get this Patreon up and running. So many exciting projects spinning around in my head.

CLAWs Up On Etsy

I've been making 1:12 scale Cobra C.L.A.W.s for G.I. JOE Classified figures for a few months now. I am only able to create a few every week and they turned out to be fairly popular so demand is still a bit high. I'm going to give Patrons the first opportunity to know when I have restocked items like this. 

JOELANTA

Hey everyone! I'm getting ready to head to JOELANTA at the end of the week. Be sure to stop by the MARK2TOYS table and say "Hello"!