I mean, I invite them for a perfectly pleasant evening meal. I go to all this effort - making the food, the place settings, I even made my own dress... and they always run away screaming....
Assuming that is they actually manage to escape....
Video coming tonight with luck!
2025-10-03 09:47:28 +0000 UTC View Post
Now one of you messaged about six weeks ago with the very sensible question.
In summary, whilst I've covered a lot about organising out homes physically, did I have any ideas on how to organise digitally.
So this was a bit of an impromptu side quest to see how far I could get, the results were interesting!!
Lo...
I actually never really twigged how cool MOPA lasers can be - the ability to actually choose what colour you want metal to be has got me super excited for all the possibilities!
The build continues of my next video - I'll be ready to film soon, but I might actually see if I can fit in a completely different video for t...
Some women go to the shops for clothes, this one uses lasers!
I've been testing out the xTool F2 Ultra's metal carving abilities, my trusty xTool P2's fabric cutting skills and the DTF's ability to overlay pre-cut patterns. You can get a glimpse of where the world of clothes crafting is going in the next decade.... ...
2025-09-20 17:00:11 +0000 UTC View Post
The playroom power chair continues to be built! This is based on a drawing done by my daughter where she dreamt up her ultimate multifunctional chair.... and why not make her dreams come true!!
A multi-skilled project involving woodwork, upholstery, electronics and more......
...but then I woke to absolutely doz...
2025-09-15 21:47:42 +0000 UTC View Post
Now I took longer than expected to finish the workshop, so you'll know I've been itching to test out resin printing (which I'm planning for an upcoming board game video) - it's actually a great example of Elegoo as they've been super cool about me just enjoying their stuff, rather than pushing for an video.
But whilst ...
2025-09-11 17:10:02 +0000 UTC View Post
Just thought I'd give you a little sneak peek of a couple new additions to the workshop!
This is xTool's upgrade to the F1 Ultra - I'm pretty excited to test this out.
Where the F1 Ultra maxed out at a very fast 4,000mm/s, this can hit 15,000mm/s!!!!
The 20W Fiber and 20W diode of the F1 Ultra gets upgraded to a ...
Well this was quite a journey!! I know several of you have been asking about this device and how it performs for home/small business use. As many of you know, I've been testing this device for months now. It's not small, it's not cheap...... but boy is it fun!!
I'm not sure I have an 'unmodded' piece of clothing left i...
2025-09-06 18:45:04 +0000 UTC View Post
Ok, in this weeks video, I'm designing against the clock - so I want to design a t-shirt in 15 mins or less.... so I want one of you to be my virtual customer!!
Here’s the idea: throw your best slogan, image or silly t-shirt idea below and I'll make the best idea and you'll see your t-shirt feature in the video!
<... 2025-09-02 17:22:52 +0000 UTC View Post
Oh this DTF printer is starting to be a lot of fun! I've been printing mad ideas for clothing all day, so I thought I'd share some of my efforts.... modelled by, er, me!
I'm starting to get a little excited by how easy this thing is to use - I've been churning designs out as fast as I can think of them. I have a fee...
Loving this new Aqara light I bought - full LED colours on the outer rim and adjustable brightness/warmth on the main light.
The Playroom is entering the final stages despite the utter carnage in here!
I've got the Serverware area just about set up and I've been fitting all the LED strips that I'll need!
O...
I've been testing xTool's Apparel Printer - it's a monstrous attempt by them to simplify the highly complex, messy and sensitive process of DTF printing. This has previously been the domain of much larger and more complicated 'factory-like' devices - so this is super interesting to me in terms of moving the industrial proces...
2025-08-23 09:34:44 +0000 UTC View Post
This was a bit of a 'penny drop' moment for me - Edge AI approaches like this are super handy. But I'm really glad to see companies like Reolink pushing these previously cloud-only capabilities to local, subscription-free products!
But I did get somewhat carried away..... :)
Well it's your bog standard evil villain, sleepwalking filamenting, escapee captive video coming soon......!
I may have got a bit carried away on this one, but it was fun!
2025-08-14 22:09:05 +0000 UTC View Post
Ok, the time has come for this mess to be sorted once and for all!
I've delayed it as there was lots of mess being created (fibre being installed, switches and routers being switched) - but there was no excuse now as I continue the build on the ultimate playroom.
This has turned into a mini project in its own right, ...
2025-08-08 14:24:36 +0000 UTC View Post
This is a rare one, folks.... a project that was waaaay easier than expected!!
It's nothing like the work I thought it'd be! Although my somewhat creepy Ron Swanson took some explaining to my husband when he saw him out the window....
Well here is the Ultimate Woodworker's Burger with all your suggestions I could pack in!
16 trees involved in the making of this - note I didn't count the bamboo skewer despite it being a wood, it isn't a tree.... should have used a cedar plank though in hindsight....
And I'm sorry, having watched basically every wo...
Hey everyone!
Just a quick sneak peek of another project I've been working on!
I've been channelling those 1950s drive in cinemas - there’s something magical about watching a movie under the stars and it's so nice to break away from the same old spot in front of the TV!
In a rare turn up for the books, th...
Ok I blame you all for this.... this was a disaster effort from me, as I was trying all your lovely drinks suggestions and ended up somewhat worse for wear.....!
Join the full discussion in the discord channel here:
2025-07-19 20:59:10 +0000 UTC
View Post
A very quick crash course into each of the systems I use and recommend..... and I had to name drop a few of you in my book preview..... ;)
Enjoy!
PS just recorded a Patreon-only video, but I tried too much of Jess's Gin suggestion, Simon's Amarula idea and Mrs D's Hands on Gin...... so I may need to edit the resu...
I've had a surprising number of requests, but unfortunately 'Gridlock', the book on 14,000 modular storage systems I featured in a previous video, is made up by me... ;)
Maybe one day I'll write the tale of our adventures in organisation.....! 😄😄
All you annual patron-tier people who have passed one year should now be starting to receive your little gifts! It's just a little thank you for your amazing support and I've written each of you a little note to express my gratitude.
You're all super special as you were the VERY first people to help encourage me in thi...
Well I installed this screen for an upcoming video and thought this was the easiest install I've done in months then...... realised it's broken. The internal spring doesn't retract at all..... <sigh>
So I have a few photos of the entire install and a dozen of me trying to work out what the heck's gone wrong and w...
I know a lot of you have been asking in discord and comments about which systems I'm now using following last year's version - so this gives a full review of which systems I'm using and why!!
Hope you enjoy - lots more to come soon with all these systems!
2025-07-07 16:06:09 +0000 UTC View Post
I'm spending far too long tidying up recently, but this one should be fun - I'm adding a little 'feature' to the BBQ area!!
But as an aside I'm looking to make The Ultimate Woodworkers Burger!! So trying to pack as many wood-related themes into a single burger - here's what I've got so far:
Oak-smoked Burgers
I had to clear up after completing my latest project, so I thought I'd share my life hack!
I've found if I fill up MY car boot with rubbish to take to the recycling centre, then it stays there for ages.
BUT, if I fill up my husband's car with all the rubbish, it just disappears and I can refill it!
This met...
As I mentioned on discord earlier, this is one of those 'ramp up' projects. When I finished it, I thought it was cool, but now I've been using it for a bit, it's just got even cooler! There's so many 'oh yeah' moments where I've forgotten my keys, need to quickly unlock, spot delivery drivers arriving and more!
Super ...
Hey all!!
Latest update from the workshop and a sneak peek of how I'm approaching things!
Also have yet another video coming this week for you all (you'll get exclusive access early) on my 2025 Organisation Systems!
Oh as I pointed out in discord, it definitely wasn't a good idea to buy Bambu Lab things l...
This is the 'Bambu Lab' moment for 2025: compact, beginner-friendly UV printer that delivers amazeball prints with barely any setup.... it's been hurting my head all the things I can now do with it!!
Enjoy!
Hey all,
Been neck deep in some pretty heavy building - cabinets, drawers, wall mounts, drawer systems and more - but ready to come up for breath!
So like buses, get ready for a whole lot of content - I've got a video coming in the next couple of days on my Self-Building workshop (yes I've made it to the point where...
