Next up this month was Pocahontas' loveable pal Meeko as the next character to add to our collection. Considering he's one of the more complex characters he was a pretty straightforward model to sculpt, I really enjoyed making his little arms and tiny hands, and to my surprise the head dress actually turned out to be super ea...
2023-09-02 19:40:37 +0000 UTC View Post
The patterned version of Meeko is now available below! once again I printed him at 16cm tall so he's a little taller than Remy, he also has no thin or fine areas so there shouldn't be any problems printing on either Resin or FDM.
RESIN
45 DEGREE ANGLE
DENSITY 75 PERCENT
...
The first version of Meeko is now available below! I printed him at 16cm tall so he's a little taller than Remy, he also has no thin or fine areas so there shouldn't be any problems printing on either Resin or FDM.
RESIN
45 DEGREE ANGLE
DENSITY 75 PERCENT
...
2023-08-29 23:49:16 +0000 UTC View Post
A little sneak peak of ornamental Meeko, I went with a more floral theme this time since the movie is based around nature, I think he's turned out really well and I'm excited to see the print. He's all finished and currently on print so hopefully if all goes well he'll be up on the page in the morning!
Tha...
2023-08-29 01:54:31 +0000 UTC View Post
Meeko is Pocahontas' cute and funny raccoon sidekick with a love of food, especially John Smith's biscuits, which he spends half of the movie pursuing.
For his pose I've decided to model him pulling his iconic tough guy pose from the scene where he is making fun of Kocoum while wearing the Native ...
2023-08-28 00:25:03 +0000 UTC View Post
Set the table with the latest addition to our rose collection, featuring the hungry raccoon Meeko! He'll make the perfect center piece for a forest themed feast or look right at home nestled in among the rest of the collection.
To print Meeko I used standard settings with tree supports on Prusa slicer, the rose models p...
2023-08-28 00:16:01 +0000 UTC View Post
Hamm and Potato Head are infiltrating Pizza Planet in our next delightful delicacy, available to download below! This suspiciously fast food was inspired by Soap Studios Awesome Alien Pizza figure and includes an adorable burger, some grumpy fries and a mega gulp drink with removable lid, perfect for storing all your pens and...
2023-08-27 03:32:19 +0000 UTC View Post
Grow as big as a house with the deliciously enticing 'Eat Me' cookies and cookie box, available to download below! The cookie box is a replica of the one Alice finds on the floor after first arriving in Wonderland, it prints in 2 parts with a lid and base that can be held together using small pieces of filament inserted into ...
2023-08-22 23:35:08 +0000 UTC View Post
Little chef Remy was our first character out this month and I'm glad to say the model came out beautifully! the fur texture picked up nicely and the patterns and details have all really added a lot to the model. His face also turned out really cute so I'm glad I chose to keep his mouth closed in the end, I also decided to lea...
2023-08-20 14:31:32 +0000 UTC View Post
The patterned version of Remy is now available below! Once again I've included a solid version and a hollowed version to prevent resin pockets in the spoon. I printed him at about 10cm which makes him a little smaller than our Mickey model, he also has no thin or fine areas so he should print fine on either Resin or FDM.
<... 2023-08-18 16:26:22 +0000 UTC View Post
The first version of Remy is now available below. I've included a solid version and a hollowed version to prevent resin pockets in the spoon. I printed him at about 10cm which makes him a little smaller than our Mickey model, he also has no thin or fine areas so he should print fine on either Resin or FDM.
Just a little sneak peak of ornamental Remy so far, I went with super fancy patterns this time because he's a super fancy rat, but I love the way they've turned out so far he almost reminds me of a royal guard from the back. I just have his head to finish now and he should be up on the page in the next few hours!
Remy is a very talented rat who dreams of becoming a world famous chef in Disney's Ratatouille.
For his pose I'm going to model him holding his wooden spoon and wearing his little chef's hat, sitting like he is in the picture below, I think it'll have a nice combination of cuteness as well as represent ...
2023-08-13 15:07:30 +0000 UTC View Post
Based on Snow White's Evil Queen, the first of our villainous cupcakes is now available to download below! it prints in 2 halves which connect to make a lovely trinket box, perfect for storing small items such as beads and jewellery or even cake decorating supplies! I printed mine at 8cm tall which makes it a little bigger th...
2023-08-13 13:44:32 +0000 UTC View Post
This month on the page its all about food! and I've got some mouthwatering models for you to sink your teeth into. For starters we'll be adding a couple of culinary critters to the collection, with little chef Remy as our first character out. Then later, from one that loves to cook to one that loves to eat, Pocahontas' adorab...
2023-08-08 22:19:02 +0000 UTC View Post
To celebrate Alice's birthday this month I brought lots of Tea themed surprises to the page! Alongside the Cheshire Cat as our first character model, we made an Alice inspired teacup sculpt, a 'This way, That way' mug tree featuring some familiar faces from Tulgey wood, and a lovely set of Alice inspired teacup hair pins.
... 2023-08-08 17:48:55 +0000 UTC View Post
Mrs. Potts was our next character model out this month to accompany Chip. I always find the simpler models to be the hardest so this one was a bit of a challenge proportion wise but I think she turned out pretty nicely in the end.
To paint her I used Valejo Polished Gold for her trim, Arctic Blue for her eyes, Arteza Pe...
2023-08-08 17:03:49 +0000 UTC View Post
Nice and easy deco this time, Mrs. Potts Ornamental is now available to download below! Once again the test print ran smoothly with a drain hole placed at the bottom to prevent suction issues, I printed her at 13.5 cm tall which makes her about twice the size of Chip. She also has no thin or fine areas so there shouldn't be a...
2023-08-06 22:37:48 +0000 UTC View Post
Sorry for the delay, my little one loves bringing me home bugs! but Mrs. Potts is now available to download below. The test print ran perfectly with a drain hole placed at the bottom to prevent suction issues, I printed her at 13.5 cm tall which makes her about twice the size of Chip. She also has no thin or fine areas so the...
2023-08-05 23:09:15 +0000 UTC View Post
Mrs. Potts is the mother of Chip and head housekeeper at the castle in Beauty and the Beast, she was transformed into an enchanted teapot when the curse was cast on the castle.
Personality wise she's kind and nurturing but she also has a tough no-nonsense demeanor, like in the scene where she scolds Chi...
2023-08-01 19:03:00 +0000 UTC View Post
These lovely Beauty and the Beast tea, coffee and sugar canisters are now all ready for you to download below! I printed mine in resin at around 14cm tall, which makes them a really nice size for coffee canisters or small jars. Just to note, resin isnt suitable for the intended usuage (I'm using mine for decoration) but PLA c...
2023-08-01 15:01:24 +0000 UTC View Post
The next character model out this month was the adorable little teacup and real hero of the story, Chip! I think he's turned out really cute and the patterns look nice so I'm quite happy with him overall. I'm really excited to see the rest of the tea set come together over the next few months, I think it'll make a really nice...
2023-07-31 16:24:56 +0000 UTC View Post
The ornamental version of Chip is now available to download below. Again I printed him at 8cm tall which makes him about half the size of Mickey and a nice size to go with Mrs. Potts when we make her next. He has no thin or fine areas so there shouldn't be any issues with either resin or FDM.
RESIN 2023-07-30 01:37:48 +0000 UTC View Post
Chip is now available to download below. I printed him at 8cm tall which makes him about half the size of Mickey and a nice size to go with Mrs. Potts when we make her next. He has no thin or fine areas so there shouldn't be any issues with either resin or FDM.
RESIN
45 DEGREE ANGLE
... 2023-07-29 04:31:04 +0000 UTC View Post
The son of Mrs. Potts, Chip is an adorable and charming teacup who befriends Belle and ends up helping her and her father escape the village trap.
For the model I'm going to recreate his iconic bubble blowing pose like in the bottom left. So far I've finished sculpting his body in Fusion and now I just ...
2023-07-28 01:45:00 +0000 UTC View Post
Embrace the darker side of fairy tales with the Cursed Coaster set, now available to download below! Each coaster is based on one of Disney's infamous cursed objects and includes Aurora's spinning wheel, Beauty and the Beast's enchanted rose, Ursula's sea shell necklace and of course Snow White's Poison Apple.
Each coas...
2023-07-28 01:13:57 +0000 UTC View Post
I found these Disney collectors pins a few weeks ago and I really loved the designs, so as an added little extra for our Tea themed month I've made some lovely 3d printable bobby pins. Print time is about 2 hours, I made the tea cups in Resin and the pins themselves in gold PLA, all the pieces are printable separately so they...
2023-07-27 02:07:48 +0000 UTC View Post
Don't step on the mome raths in our Tulgey Wood diorama, now available below!
The model includes a bunch of familiar creatures from Tulgey Wood including the pencil birds, hammer birds, baby and mama horn ducks and the mome raths. I've made about 4 different versions of each creature for a variety...
2023-07-24 22:00:00 +0000 UTC View Post
The Alice in Wonderland Mug Tree is now available to download below! Based on the scene from Tulgey Wood, it features a handful of infamous woodland creatures including the pencil birds, hammer birds, baby and mama horn ducks as well as the mome raths for you to decorate as you please. I've made around 4 different versions of...
2023-07-24 17:55:30 +0000 UTC View Post
The first of this months character models was everyone's favourite crazy cat, Alice in Wonderland's Cheshire Cat. I was a little on the fence about this one before I started but I'm really pleased with the end result and his strange pose ended up making this such a fun and unique model to sculpt!
To paint him I used an ...
2023-07-18 22:19:31 +0000 UTC View Post
![Noah Productions [NP] from patreon](https://xxx4fans.com/istorage/42432.jpg)
