I've got gadgets and gizmos aplenty for you this month as we celebrate the release of The Little Mermaid live action remake! we'll be jumping straight in with everyone's favourite guppy, Flounder, coming to the page in a couple of days, followed by our next Magical Item for the collection, with both small and full sized print...
2023-05-17 23:44:21 +0000 UTC View Post
We started off the Easter month with a fun little Egg hunt to mark the occasion and celebrated with the one and only Thumper as the first model of the month. I also started the next mini collection on the page with the adorable Donald Duck as the first release from my new Disney Baby collection.
Then starting off May I ...
2023-05-17 23:37:38 +0000 UTC View Post
Bring a touch of magic from the hundred acre wood to your home with this beautiful family tree, inspired by the home of Winnie The Pooh. The tree is fully printable in one piece and has branches stretching right the way around, meaning there's plenty of space to decorate with all the initials of your loved ones. Letters A-Z a...
2023-05-17 03:51:15 +0000 UTC View Post
Brighten up the room with the latest addition to our rose collection, available to download below! I printed mine in Golden PLA, using my standard settings with the exception of lowering the support density to 10 percent, due to trauma from the last print. This model has made a lovely addition to our kitchen but its suited to...
2023-05-14 02:32:36 +0000 UTC View Post
Our next character this month was the tubby little cubby all stuffed with fluff, its Winnie The Pooh, now available to download below.
The test prints ran smoothly, with a well placed drain hole to the underside of his belly. He should be fine printing on either resin or FDM since he has no small ...
2023-05-13 02:18:38 +0000 UTC View Post
The decorated version of Pooh is now all ready to download below! The test print again ran nice and smoothly, with a well placed drain hole to the underside of his belly. He should be fine printing on either resin or FDM since he has no small areas, but the bees wings unfortunately may not survive on FDM.
I've printed h...
2023-05-10 02:47:01 +0000 UTC View Post
The first version of Pooh is now all ready to download below! The test print ran nice and smoothly, with a well placed drain hole to the underside of his belly. He should be fine printing on either resin or FDM since he has no small areas, but the bees wings unfortunately may not survive on FDM.
I've printed him at 12cm...
2023-05-05 02:32:00 +0000 UTC View Post
The patterning is all finished and Pooh is looking pretty fancy, I'm just working on the renders and he will be up on the page. I went with a leafy and floral theme this time since he lives in the woods and I thought it suited quite well. I really love the big patterns on the side of his face, they give a really fancy helmet ...
2023-05-03 00:02:20 +0000 UTC View Post
Winnie the pooh is the iconic honey loving teddy bear from the incredibly popular franchise of the same name. He spends his days going on adventures with his best friend, a boy named Christopher Robin, and all of his other stuffed animal friends, usually on a quest to find honey.
For the model I have to...
2023-05-02 13:42:31 +0000 UTC View Post
If our last character wasn't sweet enough for you maybe this will sweeten the pot! we're starting off our Winnie The Pooh themed models with this lovely decorative honey pot, now available to download below.
I printed mine in gold PLA at 13cm tall (including the lid) but it can easily be re-scaled and u...
2023-05-02 02:27:19 +0000 UTC View Post
We're ending the Easter festivities with the start of a brand new mini collection on the page! and since spring wouldn't be complete without a chick, who better to start off my adorable range of lo-poly Disney Baby's then the one and only Donald Duck.
The new collection will include many baby characters from right acros...
2023-05-01 00:57:26 +0000 UTC View Post
Hopping onto the page to celebrate the Easter month was the adorable little rabbit, Thumper, as the first of our character models out this month. I printed him in 2 different sizes, large and small and both models turned out really nice, although I definitely prefer the smaller one, which just seems like a nicer fit alongside...
2023-04-27 17:16:40 +0000 UTC View Post
Decorative Thumper is now available for you to download below! I printed this one at 9cm tall instead in order for him to be a nice size when I make Bambi and Flower, the clean version was printed at 11cm tall for those wanting to print both the same size. The test print again came out perfectly with a drain ...
2023-04-25 21:55:48 +0000 UTC View Post
The test print is all finished and Thumper is now available for you to download below! I printed him at 11cm tall which is a little shorter than Mickey, the print came out perfectly with a drain hole placed directly under his belly, he also doesn't have any thin or fine areas so there shouldn't be any problems printing on eit...
2023-04-22 00:44:01 +0000 UTC View Post
Thumper's patterns are all done and I've got the test print running overnight, so providing there's no issues with the print he'll be out on the page sometime throughout tomorrow. This one went surprisingly easier than I thought it would and ended up just being a really fun model to sculpt, I'm quite happy with the way he's t...
2023-04-20 19:13:24 +0000 UTC View Post
Thumper is Bambi's best friend who is primarily known for his trait of repeatedly thumping his foot on the ground. His role in the film is to teach Bambi the ways of the forest.
I've decided to model him like in the pose above, while also incorporating him thumping his foot to give him a little pe...
2023-04-16 18:02:01 +0000 UTC View Post
Starting off April I've got an egg hunt lined up as a bit of fun for over the Easter holidays, don't worry there's no Disney themed riddles involved you just have to follow the links on each page to find the next egg! The hunt takes you on a mini tour around the PoisonApplePrints main pages, where you'll find a little...
2023-04-16 01:51:07 +0000 UTC View Post
This month on the page we'll be adding a couple of amazing fan favourites to the collection, starting off by celebrating Easter with Thumper as our first character model of the month. I'll also have a fun little eggstra special extra to go alongside him, as well as the start of the next mini model collection coming in a coupl...
2023-04-14 00:24:50 +0000 UTC View Post
This month was the first of our Patron Picks month's on the page and we had some amazing choices! We started the month with Minnie Mouse and ended with Pascal from Tangled, and they've both made perfect new additions to the collection.
Elsewhere on the page I had lots of extras out this month! we celebrated mothers day ...
2023-04-13 17:32:39 +0000 UTC View Post
Trust me pet, Listen to your mother, It's a scary world out there! So protect yourself from the Ruffians, thugs, poison Ivy, and quicksand, now you can be the bad guy with Mother Gothel's Dagger, available to download below!
The print comes in 4 pieces, which makes it much easier to paint, and is really easy to assemble...
2023-04-13 01:13:42 +0000 UTC View Post
Whether you're honoring the lost Princess or you just wanna see the floating lanterns gleam, light up your home with these lovely tangled inspired electric tea light holders, available to download below. There are 2 versions available, a small embossed version and a large silhouette version.
The embossed version s...
2023-04-12 00:11:34 +0000 UTC View Post
The second and final of our Patron Picks this month was Rapunzel's colour changing sidekick Pascal, chosen by Aurรฉlie, now available to download below!
I'm happy to report no issues running the test prints, although the drain hole was a little difficult to place with him being so small, I settled...
2023-04-11 17:37:39 +0000 UTC View Post
Fancy Pascal is all ready to download below. The drain hole was a little difficult to place with him being quite small so I settled on placing it on the underside of his belly and I'm happy to say had no issues with the test print. The texture and detail has also come out quite nicely, and he doesn't have any thin or fine are...
2023-04-06 23:57:31 +0000 UTC View Post
Pascal is now all ready to download below. The drain hole was a little difficult to place with him being quite small so I settled on placing it on the underside of his belly and I'm happy to say had no issues with the test print. The texture and detail has also come out quite nicely, and he doesn't have any thin or fine areas...
2023-04-05 02:03:23 +0000 UTC View Post
The patterns are all done and Pascal is looking awesome, I went with a sunflower and leaf type of theme with the patterning this time and I think its worked out really well. I'll be working on painting him for the next couple of days so the photo post will be out in a day or so.
Thanks for subscribing,<...
2023-04-02 02:06:01 +0000 UTC View Post
Some fun little Minnie & Mickey dog tags for the Disney Dogs out there. I made these for the Printables dog tag contest but they could also easily work as keyrings.
Pascal WIP out shortly, See you in the next post
Harley
2023-04-02 01:14:14 +0000 UTC View Post
Decorate every inch of your Kingdom with this beautiful Corona Crest, both clean and patterned versions available to download below. I printed mine support free using my standard settings in Gold PLA at 15cm wide.
Next out will be the Pascal WIP, see you in the next post
Harley 2023-03-30 07:03:00 +0000 UTC View Post
Pascal appears in Disney's 'Tangled' as Rapunzel's pet chameleon. His role in the film is to be Rapunzel's best friend, confidant and self appointed protector. Pascal doesn't speak but communicates through a broad range of facial expressions and body gestures, since he is a c...
2023-03-29 22:45:08 +0000 UTC View Post
A sinister twist on the Disney 100 platinum ears, these ears are dripping with poison and sure to turn some heads, whether you're at Disneyland or just out on the town! and after a long day of villainy, hang up your ears on the matching headband holder, also available to download below.
I wasn't going to release these y...
2023-03-29 22:41:27 +0000 UTC View Post
Busted buttons and bows, the first of our Patron Picks models out this month was Minnie Mouse, chosen by the lovely Nicole. I decided to fit Minnie around the already made Mickey Model in the collection, since they come as a pair and will more likely be printed together. This influenced a lot of decisions with the model like ...
2023-03-28 01:19:35 +0000 UTC View Post
