pipermakes

August Photo Group~

I just wanted to get a photoset together of August. While some of the main models (sturgeon and koi) are being re-run, I wanted to have some new bits to try and spice things up and give some more option~
I also snuck in a more monopose model from my own stash. This one's the centerpiece of my own force~
On top of that, ...

August Gumroad Codes

Hey y'all, here are the August file codes for gumroad.

Gumroad 50% off code: heavyresuply
Koi and Sturgeon Kits 100% off code: alwaysabiggergun

~Pipes

*Please be aware that the Sturgeon code is for the full Sturgeon kit, and not the U...

End of the Month Wrap

I forget that some of you aren't on the discord, and I forget I can make posts here xD
For everybody that messaged me, and for all the support that you guys sent my way I am extremely grateful. This is an incredible community that we've all built up and I'm really proud of where it's gone~

And for everyone wondering...

Emergency hospital stay.

So for anybody who's been following the announcements on discord will know I've been feeling pretty under the weather putting it mildly for the past two weeks. Now about a week ago, things started to get a fair bit rougher, and I had a real big scare yesterday morning, during which I decided I needed to take this to the ER. T...

July Gumroad Codes

Hey y'all, here are the July file codes for gumroad.

Gumroad 50% off code: aboyandhisdog
Beluga Sturgeon 100% off code: spicygunboy

~Pipes

July Fileset:

Beluga Pattern Sturgeon and Calappa Drone kits~  Wrapping up another month~

You've all got the rest of today and tomorrow to use the gumroad codes for the TriggerFish kits if you haven't moved over to CG&T. I'll be taking those codes down and swapping in July's 50% off code as well as the codes for the Beluga P...

Still working on a name for this one.

So if you don't follow my discord too closely, I've had a a handful of issues with Fusion where I lost a lot of progress on the first Sturgeon upgrade kit. But I cranked through last night and most of today and got back to where I was (roughly the same) before fusion decided to make me really, really sad.

I also realiz...

Atlas3DSS Vulcan Kickstarter~

Pleased to add here that I will also be adding some of the most recent Calappa Drones to the Atlas3DSS Vulcan Resin Kickstarter~

For those who are unaware, Atlas3DSS are the lovely folks that I use to pre-support all of my files. If you've printed any of my supported files, you've printed their work~ Honestly it's jus...

500Sub model kit, an Agro Shield boy, and fusion360 trying to make me pull out my hair.

So fusions been giving me all kinds of hell the past week while I'm working on the first Sturgeon expansion kit, ultimately losing me about 18 hours of work (twice), so I worked on some low impact models to get the vibe goin again, cause that kinda stuff is really demoralizing :T What you see t the end is the plan for having ...

New Filehosting set up

Hello friends~! Patreon has unfortunately kinda forced my hand with this one. There's an issue that's been becoming a bit more prevalent with their discord bot not un-assigning roles despite people having un-subbed months ago. Thus giving them access to the files despite not being subbed.
I have since removed all monthly f...

June's TriggerFish heavy GravSkimmer

One of the heavier in class GravSkimmers to see the frontlines. Despite it's nimble appearance this skimmer packs a heavy arsenal, absolutely obliterating their targets from afar. If you find yourself to be down the sights of one of these, you'd do your best to not be~

This is my first go at modeling any sort of vehic...

TriggerFish Update:

Hey y'all end of the month's coming up on the ArcherFish set, so I'm throwing up another quick set of WIPs for the TriggerFish~

This coming kit will include pieces to assemble the TriggerFish in a turret mounted and hullmounted variant, with the potential for an undermounted turret if I have the time for it~ As well as...

May WIP post #1

Hey-ho We've got some lil' guppies to add to the mix, and the blocking out of the TriggerFish Grav tank.
I finally got a drone design that I actually like, and jeez the basic shapes on the central body of the TriggerFish gave me some work to get right, flowing curved surfaces isn't really my strong point in CAD but it mak...

ArcherFish Class Mech

Stalking the back of battlefields picking targets off with precision, the ArcherFish class mech packs a small arsenal, from giant cannons to a near endless supply of missiles to dominate from afar.

This is another large kit with a ton of variable configs and with a bit of scaling, almost all of the bits from the Koi me...

Last ArcherFish WIP Set

I've got a few more bits to wrap up on this kit, and it's gonna be like the Koi Battllesuit. Way to many configs to reasonably render, so hopefully a shot of all the pieces will convey some of that. Along with some generic setups like here.

I want to finish this kit up in a couple of days so I can start working through ...

More ArcherFish WIP

Almost done with the big gun mounting options, one more underheld, then some finalizing on the body/missiles/scaling tests/secondary bits~ Also added in a few different leg options. The support brace is on a balljoint  will be printed as one long piece and need to be cut to fit however long you need it~

~Pipes

Getting into the ArcherFish~

[WIP] Working through one of the mounting setups for the ArcherFish Mech. There'll be underheld, and underarm mounted variants as well. Once I get this wrapped detail wise I'm gonna get into the arms/legs, and then the other armament for it~

~Pipes

April's Koi Battlesuit.

Last reminder to grab the filesets in the #file-repository on the discord for the Sturgeon before I feed 'em to the void~

And the Koi kit will be going up around the 3rd or 4th to give patreon a second to catch up to itself. This also gives me a chance to get the supported files back to have them relea...

Koi Battlesuit Update

Just another little update on the Koi Battlesuit builder
This one's slotted for 2mm x 2mm disk magnets for easy swapping (Only applicable to the undermounted arms)

Puttering along~

I wasn't able to stream but I figured out how to record my screen xD, I hyperlapsed it so it wouldn't be boring, condensing about...

Previous months Gumroad codes being removed.

Well that lasted long

Having a lot of emails using the codes that were never a part of the patreon, and I'd be fine if it were like 20-30emails, but it's a chunk more then that so I will be removing all of the previous months codes. I'm not surprised and I kinda expected this but I'm still disappointed.

I'll still...

FishSuit MKII (official designation pending)

Working through the base model of the suit for April, adding some more heavily armored variants reworking all the weapons as well as mounting options, and for designations, it's looking like it's gonna be the guppy or koi Battllesuit.

It's a little suit, but it should have a lot of variety necessary for something so mul...

Gumroad Library~

So this is a new thing I've been working on getting together. I use Gumroad as one of my storefronts if you weren't familiar. (You should be I have a 50% off code of all the previous stuff~ "rippedfish") linktr.ee/poyper for the gumroad link.

But basically anything bought off of here stays on file, so you get a library...

Crucible of Games Collaboration/Pre-supported Files~

*Alrighty*
In just a little bit both me and Crucible of Games will be dropping the collaboration between us, which as I'm sure you know at this point, Is my Sturgeon Class Battlesuit and LeesedRenfort's 2Pi Operators. Both kits are pre-supported with the Sturgeon coming with a set of pre plates for assembling a 2 and 4 arm...

March Discount Code

Thicc

Thicc

Thicc

Thicc

Thicc

Thicc

Thicc

Thicc

Thicc

Fish.

I'm only doing this because apparently patreon doesn't blur it so anyone could have seen that despite being a locked post xD

March's Gumroad Discount Code: rippedfish

Sturgeon Battlesuit File Drop

Alrighty~!  The Raw STL files for the sturgeon are up on the discord. This also includes a little assembly guide to help out as the suit in a 4 arm config is almost 65 pieces! Which can probably get a bit tricky if you don't know what you're looking at~  Supported filed by Atlas3DSS are in the works but they're a bi...

March Notes:

To mitigate the amount of questions I'm now getting about this:

There was no February mainline file set to due to my medical in-disposal. The March file set (The Sturgeon) Will be releasing around March 4th as there's still a few things I need to finish on it.

This will also give patreon a chance to catch up. The ...

Sturgeon Base Suit

Hey friends! That February crunch is real especially given the fact that I had a bit of a late start to the month and that February is shorter (who thought that was a good idea?), but I got the base frame wrapped up and that was the hard part xD
Should be wrapping up the secondary stuff and mounting weapons tomorrow~

Another quick update~

Showin the Core suit, with the Sturgeon bits added to the exterior~

Almost done with the hard part on this piece~
(Hips are a placeholder from the AnglerGeist~)

~Pipes

Feb Update~

Hellooooo everybody~!

So for those of you who aren't on the discord, the end of January/beginning of February was a pretty rough point for me medically, but I'm back at it with this little peak at what I've been working on~

I've got a collab going between me and Crucible of Games~! Because I'm ...

Happy New Year~!

Obligatory new years post as well as the post for the start of January! December was a ride. I unfortunately didn't get all of the things I wanted to get some within the month, but I'll be working to drop the additional things as early into January as I can~ regardless of that I think you'll all really enjoy the AnglerGeist k...