Mañolo

Onyx 1.5 Graphite Lenses

Brand-new Graphite lenses for the Onyx 1.5 glasses. Designed for the outside use. You can even use them as regular sunglasses.

Polarized Onyx Lens

ECX Driver progress

Reverse-engineered ECX driver PCB.

I've finished mapping out the 3 out of 4 layers.

It was a lot of work but I feel like it will get my projects to new heights if I pull this off.

ECX333A reverse engineering

Reverse-Engineering the ECX333A PCB

Gerber files will be available to all my Patrons when I’m finished.

Right now I’m reading out all the values that I can, then I’ll re-map all of the traces

FLCoS

Fully recreated the FLCoS driver board.

It’s almost 1:1 recreation. Original uses vias smaller than 0.2mm so I’ve had to take some liberties.

It’s a 4 layer board of course.

I was so hyped to receive it but if you look very closely at the lower right edge, I’ve forgot to put traces for voltage cont...

Sideloader 2.x Regular Glasses Mount |STL Files

Now you can mount the newest Sideloader onto your existing glasses.

Sideloader 2.x Regular Glasses Mount |CAD Files

Now you can mount the newest Sideloader onto your existing glasses.

61 pin FFC connector - 0.2mm pitch | Fusion360 Library

I've had hard time looking for the 61 pin ffc connector at 0.2mm pitch so I've made one.

ECX333a FFC Size

For anyone wondering - The ECX333a FFC is actually 0.2 pitch. I’ve designed couple of experimental PCBs using 0.3 pitch and now all of them are pretty much going straight to the trash 😣

Rokid Reverse Birdbath | STL Files

A DiY AR system which uses Rokid Max optics and ECX333a display.

Sideloader Lite 2.1 | STL Files

I've modified the display gasket to use the hinge system. Whole device now mounts to the headband with screw. You can regulate the position of the display (forward and backward as well as degree). I've added a small plastic piece which helps with cutting out the combiner.

Sideloader Lite 2.1 | CAD Files

I've modified the display gasket to use the hinge system. Whole device now mounts to the headband with screw. You can regulate the position of the display (forward and backward as well as degree). I've added a small plastic piece which helps with cutting out the combiner.

Birdbath Engine 0.5 - DiY Holographic Birdbath Display | STL Files

Improved version of my birdbath engine.

Birdbath Engine 0.5 - DiY Holographic Birdbath Display | CAD Files

Improved version of my birdbath engine.

MangoPi Devkit

MangoPi Devkit is coming along nicely.

I’ve got the main parts already soldered.

I’m still missing some resistors and capacitors but I think i might be able to bypass them.

HDMI Converter 0.3 Greenlit

My newest and smallest HDMI converter has been soldered and I can proudly confirm that it’s working 🖤

It’s so small that you can actually use it instead of the 3.5 jack.

New HDMI pcb design

ECX Button Board v1 | Gerber Files

I've designed simple, two button board for the ECX display used in my recent builds.

Buttons control the brightness.

You can upload the Gerber files to any PCB maker site and they will make some for you on the cheap. I don't recommend buying assembled ones since it's just two tact switches.

Birdbath Combiner Lense | STL File

My proofed model for birdbath-style AR.

It comes with support material for ease of use.

Use clear resin with as much gloss as possible.

Cloned AR optics

Anycubic Photon External PSU | CAD Files

I've made some custom plastic parts to mount the external power supply on my Anycubic Photon resin printer.

Anycubic Photon External PSU | STL Files

I've made some custom plastic parts to mount the external power supply on my Anycubic Photon resin printer.

Rokid Max Birdbath Clone

I’ve recreated Rokid Max optics in 3D.

Now I can pretty much resin print the whole birdbath setup.

DiY HDMI Converter 0.24 is now working

My newest DiY HDMI converter is working. I’ve made it smaller, I’ve replaced the HDMI connector with HDMI Micro and added solder pads for easier display soldering

Got Rokid Max glasses

I’ve bought broken Rokid Max glasses to tear them down do some reverse engineering in hope I can improve my birdbath design.

Turns out that the glasses actually work and seller didn’t know how to get them to work 🙃

So now I don’t want to tear them down since I’ve got a pretty good...

Sideloader 2.0 Video Coming Soon

I've finished recording the Sideloader 2.0 video.

It's a short one but it shows how you can get it working on your own.

Only voiceover left to do.

You can get the files right now for as little as 5$

ECX33A HDMI Cable 1.0 | STL Files

ECX33A HDMI Cable 1.0 | CAD Files

Birdbath Engine 0.4 - DiY Holographic Birdbath Display

Sideloader Lite 2.0 | STL Files

This one uses the ECX333A display which is almost two times bigger than original FLCoS.