Howdy, wonderful people!
I love working out ways to make vase mode do interesting things, and one of my favourite interesting things to make it do is give the impression of distinct shapes and layers overlapping each other.
So, I started out by making bowls with raindrops. The raindrops became diamond...
2023-05-23 16:28:52 +0000 UTC View Post
Howdy, wonderful people!
The Subatomic Dice Depository is a neo-retro-industrial container with a hefty hinged lid with a screw thread closure and a lot of gratuitous texture. But more importantly, it prints with a slide-out drawer for organising dice!
2023-05-23 16:28:40 +0000 UTC
View Post
Woohoo, I'm going to ERRF! That's the East Coast Reprap Festival in Maryland, USA, in September/October this year. It's still half a year away but my flights from here in Australia are booked, and I'm super excited!
I will be sharing a booth with my good friends Filament Stories, Asylum Life, Fotis M...
2023-05-07 16:33:33 +0000 UTC View Post
Hey there, wonderful people!
It's fascinating to look back over ideas and see how things have developed. Someone once said that it's a sign that an idea is a good one if you can't quite work out why you didn't think of it earlier.
And, so it goes with hinged boxes! I remember precariously-balanced boxe...
2023-05-07 16:33:00 +0000 UTC View Post
Howdy, wonderful people!
The Neon Skullbox had a bunch of requests, and so there are a few variations now! All these are already up on Dropbox, and people on the Discord server probably already know about them :)
Tiny Skulls!
Okay, first thing, since it's in the photo above ...
2023-05-07 16:32:28 +0000 UTC View Post
Howdy, wonderful people!
Tiny caps that store tiny things! And which have holes for attaching a lanyard or keychain loop! These little hats come in single- and multimaterial varieties and feature a screw-in lid. The lid is underneath, so "lid" seems like an odd word, but let's just go with it...
...
2023-05-07 16:31:52 +0000 UTC View Post
Hey there, electroluminescent friends!
Yes, it's more fun with EL wire! There are two cylindrical models here, along with modifiers to slide over the outside and mix things up. Actually, that's how this model started - wondering if it would be interesting to run parallel lines of EL wire and then place trans...
2023-05-07 16:31:20 +0000 UTC View Post
A few updates and random models!
Mechanical Easter Egg - larger tolerances
We're a little past Easter now, but there's always time for mechanical eggs! Some people found the gearing a bit tight on t...
2023-04-19 15:16:28 +0000 UTC View Post
Howdy, wonderful people!
Models generally have a series of names before finally getting published, and this one was for a while named something like "screw-top square box", which is exactly what it is - a square-section box with a screw-in lid. This mechanism has a few interesting aspects!
First and foremost...
2023-04-19 15:15:59 +0000 UTC View Post
Hi there, wonderful people!
Electroluminescent wire (or just EL wire) is such cool stuff! I was reminded of it in the Clockspring3D discord recently and so jumped online and grabbed some three metre, AA-battery-powered lengths and started experimenting. A few experimental prints later, I'd worked out how tig...
2023-04-19 15:15:28 +0000 UTC View Post
Howdy, wonderful people!
I was a math nerd in high school - shocking, I know! And while that was rather a long time ago now, there are certain things that have stuck with me over the years. Most relevant today, is plotting equations! It was all a bit dry back then, understanding what sine waves looked ...
2023-04-19 15:14:55 +0000 UTC View Post
Happy almost-Easter, wonderful people!
This design came about because I was agonising over mechanical egg concepts, and decided to do something else - an assembled egg! This is a set of slices that assemble into a vaguely-egg-shaped thing, and are then held together with a threaded ring over the top.
2023-04-02 08:02:44 +0000 UTC
View Post
Happy almost-Easter, wonderful people!
I had a bunch of requests about a mechanical easter egg in a similar style to the Mechanical Valentine, and it's finally ready to roll! (pun slightly intended, har har har).
The Mechanical Easter Egg started out as an egg with a hinged top, rather than a hinged side, but that...
2023-04-02 08:02:34 +0000 UTC View Post
Larger nozzle support for Moonbeam Lamp bases
The original bases (both the regular and shorter versions) had fairly thin walls in one part, which was fine for 0.4mm nozzles, but caused some print artifacts when a larger extrusion width was used. There are now new versions of both those ...
2023-03-22 14:06:29 +0000 UTC View Post
Hey there, wonderful people!
Here we have a spinning top with a threaded handle that screws outwards after printing, simultaneously bringing the spinning point closer to the disc for stability!
Printing spinning tops is an interesting thing to explore. The thing with tops is that ideally you want a handle th...
2023-03-22 14:05:47 +0000 UTC View Post
Howdy, wonderful people!
It's a vase with gecko shapes!
Making things printable in vase mode can be a tricky thing. It's like designing to avoid overhangs, but it's something that needs to be considered in both upwa...
2023-03-22 14:05:15 +0000 UTC View Post
Howdy, wonderful people!
It's a box with sliding geary bits, a hinged lid, and a secure threaded closure!
Many years ago I made a box with a lid that had cogs along the side. It was fun, and it was an easy print bec...
2023-03-22 14:04:44 +0000 UTC View Post
Ahoy-hoy, wonderful people! Here we have a couple of updates and extras for the Gothic Hourglass and the Moonbeam Lamp...
Gothic Hourglass Case
As promised, there's a stylish home for the hourglass, and the provision for magnets will now make sense! This ornate enclosure is sized...
Hey there, wonderful people!
It's a little box that looks like a book! This one's a little larger than a gift card, and I did have that kind of thing in mind for it. Quite some time ago now I posted a gift card holder, but that one couldn't hold much more than just a card or two, and certainly didn't have fa...
2023-03-06 02:19:04 +0000 UTC View Post
Hey there, wonderful people!
I love optical illusions and things that make my eyes and brain do strange things. These caddy models are intended to do just that! Depending on the light, these models shift from arrays of concentric squares to perpendicular stripes through diamond shapes instead.
I couldn...
2023-03-06 02:18:45 +0000 UTC View Post
Howdy, wonderful people!
More fast food! I didn't actually set out to make a collection of such things, but stylised food turns out to be a fun design challenge. This one is perhaps a little less stylised than the burger or hot dog in the picture because it turns out icecream cones are fairly simple, iconic ...
2023-03-06 02:18:24 +0000 UTC View Post
Hi there, wonderful people!
It's slightly amusing that I set out to make a lamp, and it ended up looking like... a lamp!
I had picked up an LED strip and enthusiastically set out to design some kind of lamp that used it, and initially that looked very different. Imagine lampshades with helical LED str...
2023-02-17 11:20:51 +0000 UTC View Post
Howdy, wonderful people!
Ripples on water are mesmerising, and you will not be surprised to hear that that's exactly what inspired this design! How, I wondered, could one construct a form that gives the impression of ripples along it, fading away by the time they reach the top?
This one was entirely devised ...
2023-02-17 11:20:39 +0000 UTC View Post
Hi there, my favourite people!
While this fancy hourglass does fit dice, it's also a stylish piece that will bring joy to your home, office, or ominous castle ruin.
Okay, it's no accident that this gothic-styled hourglass happens to fit polyhedral dice - it was intentionally designed so that it would. ...
2023-02-17 11:20:23 +0000 UTC View Post
Here are a few recent updates based on requests!! Let's start with some variations on the Mechanical Valentine...
Mechanical Valentine Variants
* Unadorned version
* Smaller unadorned version
* Added bracing (to all four versio...
2023-02-01 11:58:38 +0000 UTC View Post
Howdy, wonderful people!
If you suspect I made this model just for the sake of that texture you'd be entirely correct. It's the same original heart profile as the Candy Hearts Vase Mode Gift Box, though it's not quite treated the same way. The angles behind the hearts are much shallower in this model to acco...
2023-02-01 11:58:21 +0000 UTC View Post
Hey there, wonderful people!
Sometimes I really just get caught up in a texture or a pattern, and that will be obvious when you see the post after this one, as it uses the same heart shape, but patterned differently. I just really liked the heart shape! It's not just the visual appeal, though, but also...
2023-02-01 11:58:01 +0000 UTC View Post
Howdy, wonderful people!
Yes, more questionable food choices in printed form! This time, we have a hot dog, complete with a delightful squiggle of delicious sauce.
The sausage is effectively a lid, and pops vertically into the bun. There are holes for optional magnets should you want more security in y...
2023-02-01 11:57:47 +0000 UTC View Post
Howdy, wonderful people!
As requested, we now have insert options for the recently-published Tentacle Treasure Chest! Specifically, there are following:
1) Two upright trays that fit together into the chest.
2) Two trays that fit one on top of the other and which are each divided into small parts.
<... 2023-01-16 16:39:41 +0000 UTC View Post
I love big assemblies and I can not lie!
I also love fractals. Trees are the classic example of building something up recursively from individual components repeated at different scales, and that's what this model is all about!
Let's look at the parts.
This is Fractal Tree G. It's pretty rudiment...
2023-01-16 16:39:28 +0000 UTC View Post
