Filament's Folly

The Deathball

It uses the same rings as all other pokeballs

Its been Fun...and we are just getting started!!

Holy ^#$@& its been a year. A year full of fun, a year full of pokemon, full of odd designs, full of printer giveaways and most of all a year full of making new friends and growing a community. I really want to thank everyone that has stuck around from the first month as well as I want to thank everyone that just got here...

Gengar Pokeball Disc

I am working the lick version should be out tomorrow or tuesday 

Mimikyu Pokeball Disc has Appeared

I will be doing the Gangar this weekend too. Both with tough and without. This fits in all of my pokeballs.

Whos that Pokemon!!

Pumpkin Pokeball

I have included both small and Large for both Clean and Textured.

These use the same rings and all the other pokeballs and the same discs will fit.

Maybe we will have a new spooky friend to add to this pokeball soon!!

Add below who you want. 

Its Testing Day

Halloween Bulbasaur

FDM
I have included a version with a knock out base to keep supports out of the inside of the pumpkin. I had a lot of luck last year doing this. But there are option if you want to do it without

.12 layer height
Tree sup...

Our Gud Boi is Coming!!

Halloween Begins

Here is this year's first Halloween STL. I have included a version with its mouth open and closed.
This Jack-o-lantern is part of a larger halloween mashup pokemon. But I thought you guys might want it as a separate STL

FDM
I have included a version with a knock out base to keep supports out of the inside of the...

What next?

I really love Halloween 🎃
Now that we are done with team rocket should I start on the Halloween Pokemon?

Team Rocket Bases

Jessie

James

Jessie and James

Empty 

James

Standard setting for FDM
scale at double the STLs size

.12 layer height

40mm print speed

use a brim on the tail

tree supports

Resin
45 angle medium supports at 65%

Chef's Kiss

This pop together so nice. Almost done testing. 

If you have not glued Jessie to her base DONT. I am going to add a second base to this so you can have 1 base with both!!

James

We are getting closer

Eternal Darkness Tome Crest

I have 2 set of files 1 for FDM and 1 for Resin. The resin has the bone ring already supported, it took me like an hour to get it just right so I thought I would give it to you guys as well.

Standard setting for FDM

.12 layer height

40mm print speed

use a brim on the tail

tree supports

R...

September Dropbox Link

Here is this months dropbox link

https://www.dropbox.com/sh/39swvdz2rmq1zdp/AABMZU5hYyj_A9nUR67c5Kzoa?dl=0

And what is that weird thing in the pic... Well many years ago on the Gamecube the greatest ...

Jessie - Team Rocket

She prints in 9 pieces including the base.
Standard setting for FDM
scale at double the STLs size

.12 layer height

40mm print speed

use a brim on the tail

tree supports

Resin
45 angle medium supports at 65%

Ok good news bad news

Jessie legs had issues.... I had to redesign them. This is why I test. I don't want to waste your materials on bad designs.

Jessie is Testing

I am testing it now, There will be 8 piece in her plus base

Jessie

coming out in the next few day!

WobbuBobaFett

I included a few different versions, with a detached tail and as one piece. As well as a flat bottom version and a rounded bottom version.

Standard setting for FDM

.12 layer height

40mm print speed

use a brim on the tail

tree supports

Resin
45 angle medium supports at 65%

Not tonight

I really want to make sure the helmet fits right and as you can see, I have some really nice supports but no helmet.... it will be out tomorrow.

I am doing all of these, but which first?

Pick the order

Ornamental Wobbuffet

I included a few different versions, with a detached tail and as one piece. As well as a flat bottom version and a rounded bottom version.

Standard setting for FDM

.12 layer height

40mm print speed

use a brim on the tail

tree supports

Resin
45 angle medium supports at 65%

Tiki/Wooden Deadpool head - Wall art

For FDM
Print on build plate no supports

Resin
you can shrink print it on the build plate. 

or you can angle it at 45% and use 65% supports.


for painting
spray paint black, then dry brush or sponge red over it. 

Quick Update

I will be releasing a Deadpool STL today.

ornamental wobbuffet This weekend
and then both Jesse and James next week.
I have been quiet but busy :)

Wobbuffet-Clean

I included a few different versions, with a detached tail and as one piece. As well as a flat bottom version and a rounded bottom version.

Standard setting for FDM

.12 layer height

40mm print speed

tree supports

Resin
45 angle medium supports at 65%

 

We are making it Double

Amazon Box Mimic

The body has 2 versions for each FDM and Resin
this is due to the supports needs
V1 normal mouth. see in pics
v2 extended mouth for easier assembly

Standard setting for FDM
The body with the bottom plate is easiest to remove supports from

.12 layer height

40mm print speed

tree support...